Single phase motor -ML 80B 0.75 kW 4pol-B34
Product information "Single phase motor -ML 80B 0.75 kW 4pol-B34"
Single phase motor with Operating and Starting capacitor
Power= 0.75 kW, Speed= 4 pole, Voltage= 1 x 230 V (± 5% according to VDE 0530),
Weight= approx 10.8 kg, Shaft = 19 x 40 mm, Frequency= 50 Hertz, Degree of protection= IP55, Operating mode= S1- 100% ED.
Paint= RAL 5010 (gentian blue), Temperature sensor= 1 x PTC- Thermistor. Cooling= axial fan,
Insulation class = F (155 ° C), Terminal box position= top, Housing= die-cast aluminum,
Ball bearing= SKF, C & U, o. equivalent, Motor feet= screw-on resp. can be unscrewed.
Single phase motors are suitable for both directions of rotation.
Optional:
On / off switch with reversing switch for left / right rotation, underVoltage release,
Collar connector = 1 x 230 V, switching capacity = 16 A, ambient temperature = -5 ° C to + 40 ° C,
Cable between motor and switch housing = approx. 90 cm.
Generally:
Owned by the starting and operating capacitor the 230V motor has a stronger starting torque.
The starting capacitor is switched off when the Speed is reached by a centrifugal switch.
Speed control via frequency converters or the like therefore leads to faults and is not permitted.
All product photos are non-binding Examples !
| Ambient temperature: | 40 °C |
|---|---|
| Breakdown to nominal torque (Mk/Mn): | 1,75 Nm |
| Current: | 4,56 A |
| Efficiency (100% / 75% / 50%): | 73,0 |
| Engine protection: | PTC thermistor single |
| Flange dimensions: | 120 x 80 x 100 mm |
| Frequency: | 50 Hz |
| Installation altitude: | 1000 m |
| Operating mode: | S1 |
| Performance: | 0,75 kW |
| Pick-up to rated current (la/In): | 27,00 A |
| Power factor: | 0,98 Cos φ |
| Shaft dimensions: | 19 x 40 mm |
| Tightening to nominal torque (MA/Mn): | 2,50 Nm |
| Torque: | 5,26 Nm |
| Weight: | 10,9 kg |
| Rotation speed: | 1500 rpm / 4 polig |
| Shaft diameter: | 19 mm |
| Type of construction: | B3 B14 (B34) |
| Tension: | 1 x 230 V |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 1 |
| Ambient temperature: | 40 °C |
|---|---|
| Breakdown to nominal torque (Mk/Mn): | 1,75 Nm |
| Current: | 4,56 A |
| Efficiency (100% / 75% / 50%): | 73,0 |
| Engine protection: | PTC thermistor single |
| Flange dimensions: | 120 x 80 x 100 mm |
| Frequency: | 50 Hz |
| Installation altitude: | 1000 m |
| Operating mode: | S1 |
| Performance: | 0,75 kW |
| Pick-up to rated current (la/In): | 27,00 A |
| Power factor: | 0,98 Cos φ |
| Shaft dimensions: | 19 x 40 mm |
| Tightening to nominal torque (MA/Mn): | 2,50 Nm |
| Torque: | 5,26 Nm |
| Weight: | 10,9 kg |
| Rotation speed: | 1500 rpm / 4 polig |
| Shaft diameter: | 19 mm |
| Type of construction: | B3 B14 (B34) |
| Tension: | 1 x 230 V |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 1 |
Accesories
