Brake motor BM3 100L - 1.5 kW-6pole-B14
£566.87
Available, delivery time: about 3-4 business days
Product information "Brake motor BM3 100L - 1.5 kW-6pole-B14"
Brake motor, Power= 1,5 kW, Speed= 1000 rpm
Type= B14, Shaft= 28 x 60 mm, Efficiency class= IE3, Efficiency= 82,5 %, Weight= 28,6 kg,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% gemäß VDE 0530), Temperature sensor= 3 x PTC-Thermistors,
Paint= RAL 5010 (gentian blue), Frequency= 50/60 Hertz, Degree of protection= IP55, Brake= 32 Nm 230V with rectifier.
Housing= die-cast aluminum, insulation class= F (155°C),
Ball bearing = SKF, C&U or equivalent, Cooling = Axial fan (plastic), Motor feet = can be screwed on or unscrewed.
The Electric motor is suitable for use with frequency converters and complies with IEC 60034-30: 2008.
The spring-loaded brake brakes the Electro motor in de-energized state. In inverter mode, the brake is
resp. to control the brake rectifier externally. For manual unlocking, a manual override lever is optionally available.
The brake motor is suitable for both directions of rotation. All product photos are non-binding examples!
| Engine protection: | PTC thermistor 3-fold |
|---|---|
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 1,5 kW |
| Rotation speed: | 1000 rpm / 6 polig |
| Shaft diameter: | 28 mm |
| Type of construction: | B14 |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 3 |
Accesories
Hand release for mechanically unlocking the brake Mounted on the engine or brake. Only in conjunction with a JS brake motor. Cannot be ordered individually! All product photos are non-binding examples! Technical changes reserved.
Brake coil 24V/DC, exchangeable. Available as an option for BMS series motors. ! Only an additional charge - not available separately! Image shows additional equipment "manual release"!All product photos are non-binding examples! Subject to technical changes.
Kaltleiterauslösegerät, Motorschutz, PTC-Auswertung Operating voltage：AC 220V Allowable volt tolerance：±20% Frequency：50～60Hz Self-consuming power：<0.8VA Allowable environment temperature：-30～70℃ Rated current of switch：7A Operating resistance：3KΩ (1±10%) Restoring resistance：1500～1800Ω Weight：0.2Kg
Special flange for Electro motors the size 71 Flange B14 in big version.Ø140 x 95 x 115 mm, (P x N x M)screw thread= 4 x M8 The special flanges do not fit the motors in a reduced size! ! only surcharge in exchange - not available individually!
Heating tape for a space heater for Electric motors size 100-112-132 The anti-condensation heater is used to prevent the formation of condensation to prevent during operational breaks.