Electro motor, Three-phase motor, Power= 132 kW, Speed= 3000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,4%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 65 x 140 mm Weight= 730 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 75 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 94,6%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 80 x 170 mm Weight= 725 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 110 kW, Speed= 1500 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,4%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 80 x 170 mm Weight= 700 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 90 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 94,9%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 80 x 170 mm Weight= 760 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 132 kW, Speed= 1500 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,6%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 80 x 170 mm Weight= 775 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 110 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,1%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 950 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 160 kW, Speed= 3000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,6%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 70 x 140 mm Weight= 980 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 132 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,4%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 990 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 160 kW, Speed= 1500 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 900 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 200 kW, Speed= 3000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 70 x 140 mm Weight= 1035 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 250 kW, Speed= 3000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 70 x 140 mm Weight= 1100 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 160 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,6%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1150 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 200 kW, Speed= 1500 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 96%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1140 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 280 kW, Speed= 3000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 70 x 140 mm Weight= 1150 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 180 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,6%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1200 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 250 kW, Speed= 1500 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 96%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1190 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 200 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1230 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 315 kW, Speed= 3000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 70 x 140 mm Weight= 1260 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 280 kW, Speed= 1500 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 96%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1200 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 355 kW, Speed= 3000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 70 x 140 mm Weight= 1360 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 225 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1390 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 400 kW, Speed= 3000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 70 x 140 mm Weight= 1430 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 250 kW, Speed= 1000 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 95,8%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1450 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Electro motor, Three-phase motor, Power= 315 kW, Speed= 1500 rpm, Construction type= B3 Voltage= 3 x 400/690 V-50 Hz, Efficiency class= IE3, Efficiency= 96%, Paint= RAL 7031 (Blue-gray), Degree of protection= IP23, Temperature sensor= 3 x PTC130°C and 3 x PTC150°C-thermistors, anti-condensation heater, Shaft= 90 x 170 mm Weight= 1350 kg, Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F, TEFC IC01, Ball bearing= SKF or equivalent, Cooling= inside cooling, Motor feet= fixed potted (if present).The Electric motor is suitable for frequency converter use and for both directions of rotation. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry.Also available in flange version for an additional charge. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
IP23 - Electric motors
JS-Technik GmbH specialises in professional drive technology with a focus on electric motors, frequency inverters and geared motors. On this page you will find a selection of electric motors in grey cast iron designs in the sizese 160, 180, 200, 225, 250, 280, 315, 355 and 400, with an output of 4.0kW, 5.5kW, 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 55kW, 75kW, 90kW, 110kW, 160kW, 200kW, 250kW, 315kW and 500kW. The drives are available in different speeds, i.e. 2-pole, 4-pole, 6-pole and 8-pole. These are of course energy-saving motors and are also available in IE4. For space reasons, three-phase electric motors with protection class IP23 are often required, which we can also supply at short notice.
Space-saving electric motor in IP23
Motor in special design
Electric motors with customised requirements are often needed. We are the ideal partner for you here, as our specialised staff, combined with an extensive motor warehouse and our own final assembly, enable us to cover a wide range: special brake motors, electric motors with frequency converters, drum motors or with special voltage, e.g. as medium-voltage motors.
Standstill heating
In three-phase motors that are exposed to strong temperature fluctuations or extreme climatic conditions, the motor winding is at risk from condensation or condensation. As an option, a built-in standstill heater can heat the motor winding after switching off and prevent moisture condensation inside the motor. The standstill heater should not be switched on during operation.
Rotor balancing
The rotors of all motors are dynamically balanced with a half feather key inserted in accordance with DIN ISO 8821. Drive elements such as pulleys, couplings and pump wheels must also be dynamically balanced with a half feather key inserted. Care must be taken to ensure that the hub length and the length of the keyway match so that no additional residual imbalance occurs. Full key balancing is also possible on special request.
Smooth mechanical running
Due to the balancing and concentricity tolerances, the vibration behaviour of the motors corresponds to vibration level A in accordance with DIN EN 60034-14. Motors can be supplied in a low-vibration version if special requirements are placed on mechanical smoothness.
SEO=IP23 electric motors from 11kW to 710kW