Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0.25 kW, Speed= 8.5 - 41 rpm, Reduction with adjustment unit (i)= 33.8 – 168.9, only Ratio gear(i)= 24,13, Torque (M²)= 58 - 116 Nm, Service factor (fs)= 1.0 – 2.1.Type= B3 (B35 gegen Aufpreis), Welle= 20x40 mm, Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0.25 kW, Speed= 6.5 - 31 rpm, Reduction with adjustment unit (i)= 44.8 - 224, only Ratio gear(i)= 32,02, Torque (M²)= 51 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0.25 kW, Speed= 10 - 48 rpm, Reduction with adjustment unit (i)= 28.9 – 144.6 only Ratio gear(i)= 20,66, Torque (M²)= 33 – 66 Nm, Service factor (fs)= 1.2 – 2.4, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0,37 kW, Speed= 37 - 175 rpm, Reduction with adjustment unit (i)= 8 - 38, only Ratio gear(i)= 5,57, Torque (M²)= 13 - 26 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power=  0,37 kW, Speed= 52-233 rpm, Reduction with adjustment unit (i)= 6 - 27, only Ratio gear(i)= 3,90, Torque (M²)= 9 -18 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0,37 kW, Speed= 26 - 127 rpm, Reduction with adjustment unit (i)= 11 – 54, only Ratio gear(i)= 7,84, Torque (M²)= 19 - 38 Nm, Service factor (fs)= 1.9 – 3.8, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power=  0,37 kW, Speed= 14 - 29 rpm, Reduction with adjustment unit (i)= 10 – 48, only Ratio gear(i)= 6,91, Torque (M²)= 17 - 34 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0,37 kW, Speed= 21 - 100 rpm, Reduction with adjustment unit (i)= 14 – 69, only Ratio gear(i)= 9,87, Torque (M²)= 24 – 48 Nm, Service factor (fs)= 1.6 - 3.3, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0.37 kW, Speed= 9 - 48 rpm, Reduction with adjustment unit (i)= 29 - 144, only Ratio gear(i)= 20.66, Torque (M²)= 49 - 100 Nm, Service factor (fs)= 0.85 - 1.7, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 20.7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED. The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0.55 kW, Speed= 27 - 127 rpm, Reduction with adjustment unit (i)= 11 – 52, only Ratio gear(i)= 7,45, Torque (M²)= 27 - 54 Nm, Service factor (fs)= 1.3 -2.7, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= ca.22.2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0.55 kW, Speed= 18 - 87 rpm, Reduction with adjustment unit (i)= 16 - 77, only Ratio gear(i)= 11,14, Torque (M²)= 40 - 80 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 22.2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0.37 kW, Speed= 1.5 - 7 rpm, Reduction with adjustment unit (i)= 193.9 – 969.8, only Ratio gear(i)= 138,55, Torque (M²)= 327 - 654 Nm, Service factor (fs)= 0.7 – 1.4, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm, Weight, = 34.8 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 1.5 kW, Speed= 37 - 218 rpm, Reduction with adjustment unit (i)= 6.4 – 37.4, only Ratio gear(i)= 4,56, Torque (M²)= 45 – 90 Nm, Service factor (fs)= 0.65 – 1.3, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 29,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 1.5 kW, Speed= 47 - 276 rpm, Reduction with adjustment unit (i)= 5.06 – 29.6, only Ratio gear(i)= 3,62, Torque (M²)= 36 - 72 Nm, Service factor (fs)= 0.75 – 1.5, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= 29,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 1.1 kW, Speed= 31 - 181 rpm, Reduction with adjustment unit (i)= 7.7 – 44.8, only Ratio gear(i)= 5,47, Torque (M²)= 39 – 78 Nm, Service factor (fs)= 1.0 – 2.0, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 28,7 kg, Paint= RAL5010, ,Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 1.5 kW, Speed= 37 - 218 rpm, Reduction with adjustment unit (i)= 6.4 – 37.5, only Ratio gear(i)= 4,57, Torque (M²)= 45 - 90 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 31,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 0.55 kW, Speed= 3 - 10 rpm, Reduction with adjustment unit (i)= 135 – 675, only Ratio gear(i)= 96,52, Torque (M²)= 339 – 678 Nm, Service factor (fs)= 0.65 – 1.3, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm. Weight, = 38,1 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 1.1 kW, Speed= 7.5 - 43 rpm, Reduction with adjustment unit (i)= 32.2 – 188.7, only Ratio gear(i)= 23,01,  Torque (M²)= 165 - 330 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm, Weight, = 34,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 1.1 kW, Speed= 9 - 53 rpm, Reduction with adjustment unit (i)= 26.4 – 154.5, only Ratio gear(i)= 18,85, Torque (M²)= 135 - 270 Nm, Service factor (fs)= 0.95 – 1.9, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm, Weight, = 34,7kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 1.1 kW, Speed= 4 - 23 rpm, Reduction with adjustment unit (i)= 59 – 347, only Ratio gear(i)= 42,41, Torque (M²)= 301 -602 Nm, Service factor (fs)= 0.75 – 1.5, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm. Weight, = 40,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 1.5 kW, Speed= 6.7 - 38 rpm, Reduction with adjustment unit (i)= 36.2 – 212.3, only Ratio gear(i)= 25,89, Torque (M²)= 254 - 508 Nm, Service factor (fs)= 0.9 – 1.8, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm, Weight, = 43,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power=  2.2 kW, Speed= 30 - 152 rpm, Reduction with adjustment unit (i)= 9.2 – 46.2, only Ratio gear(i)= 6,60, Torque (M²)= 96 – 192 Nm, Service factor (fs)= 0.75 – 1.5, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 37,2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 3.0 kW, Speed= 42 - 208 rpm, Reduction with adjustment unit (i)= 6.7 – 33, only Ratio gear(i)= 4,78 Torque (M²)= 95 - 190 Nm, Service factor (fs)= 0.7 – 1.4, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 40.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.

Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 3.0 kW, Speed= 59 - 297 rpm, Reduction with adjustment unit (i)= 4.7 – 23.6, only Ratio gear(i)= 3,38, Torque (M²)= 67 – 134 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 40.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.