Frequency Inverter, 1x 230V, EASYdrive alpha 0.37 kW Frequency inverterPower= 0.37 kW, Size= alpha, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 187mm x 126mm x 70mm,Rated current output, eff. [IN at 8 kHz]= 2.2 A, Mains current (input)= 4.5 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency inverter, it should be noted that there are 2 variants. Firstly, this includes the devicein standard version and secondly the device with a membrane keyboard. There is a potentiometer in both versionsoptional to order.The one shown “ Frequency inverter in standard version” is fully usable.but requires a corresponding control panel to control it. One of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI control unit" needed no optional control panel,There is also a display in the device lid. The options mentioned are if required usable. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 1x 230V, EASYdrive alpha 0.25 kW Frequency inverterPower= 0.25 kW, Size= alpha, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 187mm x 126mm x 70mm,Rated current output, eff. [IN at 8 kHz]= 1.4 A, Mains current (input)= 4.5 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency inverter, it should be noted that there are 2 variants. Firstly, this includes the devicein standard version and secondly the device with a membrane keyboard. There is a potentiometer in both versionsoptional to order.The one shown “ Frequency inverter in standard version” is fully usable.but requires a corresponding control panel to control it. One of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI control unit" needed no optional control panel,There is also a display in the device lid. The options mentioned are if required usable. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 1x 230V, EASYdrive alpha 0.75 kW Frequency inverterPower= 0.75 kW, Size= alpha, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 187mm x 126mm x 70mm,Rated current output, eff. [IN at 8 kHz]= 3.3 A, Mains current (input)= 7.3 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency inverter, it should be noted that there are 2 variants. Firstly, this includes the devicein standard version and secondly the device with a membrane keyboard. There is a potentiometer in both versionsoptional to order.The one shown “ Frequency inverter in standard version” is fully usable.but requires a corresponding control panel to control it. One of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI control unit" needed no optional control panel,There is also a display in the device lid. The options mentioned are if required usable. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 1x 230V, EASYdrive alpha 0.55 kW Frequency inverterPower= 0.55 kW, Size= alpha, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 187mm x 126mm x 70mm,Rated current output, eff. [IN at 8 kHz]= 2.7 A, Mains current (input)= 5.8 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency inverter, it should be noted that there are 2 variants. Firstly, this includes the devicein standard version and secondly the device with a membrane keyboard. There is a potentiometer in both versionsoptional to order.The one shown “ Frequency inverter in standard version” is fully usable.but requires a corresponding control panel to control it. One of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI control unit" needed no optional control panel,There is also a display in the device lid. The options mentioned are if required usable. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 1x 230V, EASYdrive 0.37 kW Frequency inverterPower= 0.37 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 2.3 A, Mains current (input)= 4.5 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 1x 230V, EASYdrive 0.55 kW Frequency inverterPower= 0.55 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 3.2 A, Mains current (input)= 5.6 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 0.55 kW Frequency inverterPower= 0.55 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 1.7 A, Mains current (input)= 1.4 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 1x 230V, EASYdrive alpha 0.75 kW Frequency inverterPower= 0.75 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 3.9 A, Mains current (input)= 6.9 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 0.75 kW Frequency inverterPower= 0.75 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 2.3 A, Mains current (input)= 1.9 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 1x 230V, EASYdrive alpha 1.1 kW Frequency inverterPower= 1.1 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 5.2 A, Mains current (input)= 9.2 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 1.1 kW Frequency inverterPower= 1.1 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 3.1 A, Mains current (input)= 2.6 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 1.5 kW Frequency inverterPower= 1.5 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 4.0 A, Mains current (input)= 3.3 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 2.2 kW Frequency inverterPower= 2.2 kW, Size= B, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 270mm x 189mm x 140mm,Rated current output, eff. [IN at 8 kHz]= 5.6 A, Mains current (input)= 4.6 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 3.0 kW Frequency inverterPower= 3.0 kW, Size= B, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 270mm x 189mm x 140mm,Rated current output, eff. [IN at 8 kHz]= 7.5 A, Mains current (input)= 6.2 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 4.0 kW Frequency inverterPower= 4.0 kW, Size= B, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 270mm x 189mm x 140mm,Rated current output, eff. [IN at 8 kHz]= 9.5 A, Mains current (input)= 7.9 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 5.5 kW Frequency inverterPower= 5.5 kW, Size= C, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 307mm x 223mm x 181mm,Rated current output, eff. [IN at 8 kHz]= 13.0 A, Mains current (input)= 10.8 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 7.5 kW Frequency inverterPower= 7.5 kW, Size= C, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 307mm x 223mm x 181mm,Rated current output, eff. [IN at 8 kHz]= 17,8 A, Mains current (input)= 14.8 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 11.0 kW Frequency inverterPower= 11.0 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 28.0 A, Mains current (input)= 23.2 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 15.0 kW Frequency inverterPower= 15.0 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 34.0 A, Mains current (input)= 28.2 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 18.5 kW Frequency inverterPower= 18.5 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 40.0 A, Mains current (input)= 33.2 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency Inverter, 3x 400V, EASYdrive 22.0 kW Frequency inverterPower= 22.0 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 48.0 A, Mains current (input)= 39.8 A, Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply). ! Possible variant selection! Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required. Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Frequency inverters mounted on electric motors
JS-Technik GmbH specialises in extensive challenges in the field of professional drive technology. The focus is on three-phase motors, frequency inverters and geared motors. On this page you will find frequency inverters with an output of 0.37kW, 0.55kW, 0.75kW, 1.1kW, 1.5kW, 2.2kW, 3.0kW, 4kW, 5.5kW, 7.5kW, 11kW, 15kW, 18.5kW and 22kW. The high-quality frequency inverters can be mounted on all standard electric motors using a wide range of adapter plates. As there is not always enough space available, the frequency inverter is also suitable for wall mounting.
frequency inverter installation
Infinitely variable frequency inverters/ electric motors
Our infinitely variable electric motors with mounted frequency inverters are characterised by extensive parameters. Here are a few special features to mention:
Intuitive operating and programming concept, manual control unit with plain text display available as an accessory, integrated soft PLC in accordance with EN 61131-3, PC software with integrated oscilloscope function, optional fieldbus systems (CANopen, EtherCAT, Profibus), flexible use with all common motor types, asynchronousmotors, asynchronous motors, synchronous motors, EC motors, simple installation, motor-integrated or near-motor installation, indoor/outdoor usecurrent vector-orientated control, fan operation with energy-saving function, stall detection, PID controller with integrated standby function, wide input voltage range, safety circuit, easy to service, robust and compact die-cast housing with protection class IP65, very low maintenance costs.protection class IP65, very high temperature and vibration resistance, state-of-the-art circuit topology, no integrated fans (up to 7.5 kW), S1 operation at 50 °C and 8 kHz clocking.
Worm gear with frequency inverter motor
Special advantages of the EASYdrive frequency inverter
Robust aluminium housing:
Avoid costly breakdowns and control your speeds reliably and with low maintenance thanks to the stable design - even in mobile applications and heavy-duty applications.
Low-maintenance and durable:
The fanless design up to 7.5 kW and the intelligent DC link concept with film capacitors reduce susceptibility to faults and ensure a long service life.
Various application PCBs:
Take advantage of the variety and customise the EASYdrive to your needs - with additional safety functions and fieldbus interfaces.
Adapter plates for all motor types:
The innovative adaptation concept with an extensive range of standard and motor-specific adapter plates enables use with almost any motor on the market.
INVERTERapp:
Commissioning - parameterisation - monitoring, you can now do all this easily and wirelessly via Bluetooth connection from your mobile phone or tablet.
Special motors with frequency inverter
In many cases, infinitely variable frequency inverters with motors are also required as special versions with customised requirements and high quantities. We are the ideal partner for you here, as we can cover a wide range thanks to our specialised staff in combination with an extensive inverter and electric motor warehouse and our own final assembly.
SEO=frequency inverter mounted on electric motors