Claw coupling version Size=28, Torque=160 Nm, Diameter=65 mm, Taper Clamp Bushing=1108 Properties of the torsionally flexible claw coupling: - elastic claw coupling in combination with taper clamping bushes - the sliding seat facilitates the axial alignment of the coupling - the standard sprockets made of high-temperature-resistant T-PUR - short design and easy assembly - good vibration-damping properties - Steel version (black) cast GG25 - Gear rim hardness 98 ShA The claw couplings consist of two hubs (coupling halves) and a ring gear(clutch star). They require little installation space and therefore allow for easy installationas well as dismantling. Compared to conventional motor couplings, due to theMatching taper bushings require no additional drilling. Come into useThey are mainly used on electric motors, geared motors and machines in generalPlant construction. The clamping bushes are suitable for both directions of rotation.When choosing, pay attention to the torque.
Claw coupling version Size=38, Torque=325 Nm, Diameter=80mm, Taper Clamp Bushing=1108 Properties of the torsionally flexible claw coupling: - elastic claw coupling in combination with taper clamping bushes - the sliding seat facilitates the axial alignment of the coupling - the standard sprockets made of high-temperature-resistant T-PUR - short design and easy assembly - good vibration-damping properties - Steel version (black) cast GG25 - Gear rim hardness 98 ShA The claw couplings consist of two hubs (coupling halves) and a ring gear(clutch star). They require little installation space and therefore allow for easy installationas well as dismantling. Compared to conventional motor couplings, due to theMatching taper bushings require no additional drilling. Come into useThey are mainly used on electric motors, geared motors and machines in generalPlant construction. The clamping bushes are suitable for both directions of rotation.When choosing, pay attention to the torque.
Claw coupling version Size=42, Torque=450 Nm, Diameter=95 mm, Taper Clamp Bushing=1610 Properties of the torsionally flexible claw coupling: - elastic claw coupling in combination with taper clamping bushes - the sliding seat facilitates the axial alignment of the coupling - the standard sprockets made of high-temperature-resistant T-PUR - short design and easy assembly - good vibration-damping properties - Steel version (black) cast GG25 - Gear rim hardness 98 ShA The claw couplings consist of two hubs (coupling halves) and a ring gear(clutch star). They require little installation space and therefore allow for easy installationas well as dismantling. Compared to conventional motor couplings, due to theMatching taper bushings require no additional drilling. Come into useThey are mainly used on electric motors, geared motors and machines in generalPlant construction. The clamping bushes are suitable for both directions of rotation.When choosing, pay attention to the torque.
Function of torsionally flexible claw couplings
Claw couplings ensure torsional vibration-damping power transmission and absorb shocks caused by unevenly operating power machines. In contrast to flexible couplings, whose intermediate links are subjected to bending stress and therefore wear out more quickly, the flexible teeth (elastomers) are only subjected to compressive stress. This gives the elastomer coupling the advantage of being able to withstand significantly higher loads. The elastomers deform under load and at high speeds. Sufficient expansion space must be provided.
Function of torsionally flexible claw couplings: