Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 3.0 kW, Speed= 44 - 222 rpm, Reduction with adjustment unit (i)= 6.3 – 31.7, only Ratio gear(i)= 4,53, Torque (M²)= 90 – 180 Nm, Service factor (fs)= 1.3 – 2.6, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm, Weight, = 50.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 3.0 kW, Speed= 17 - 83 rpm, Reduction with adjustment unit (i)= 16.7 – 83.6, only Ratio gear(i)= 11,95, Torque (M²)= 236 - 472 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm, Weight, = 50.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 3.0 kW, Speed= 32 - 160 rpm, Reduction with adjustment unit (i)= 8.7 – 43.4, only Ratio gear(i)= 6,21, Torque (M²)= 123 - 246 Nm, Service factor (fs)= 1.35 – 2.7, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm, Weight, = 50.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Helical geared motor with handwheel speed control Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz. Power= 3.0 kW, Speed= 44 - 222 rpm, Reduction with adjustment unit (i)= 6.3 – 31.5, only Ratio gear(i)= 4,50, Torque (M²)= 89 – 178 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm, Weight= 45,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, The variable Speed motor corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. The Speed adjustment is only allowed when the engine is running. Do not adjust when standing! When ordering, please select the desired mounting position! Important InformationThis drive unit is a custom-made product. Returns or cancellations are not accepted!All product photos are for illustrative purposes only. Technical specifications are subject to change.
Gear motor and handwheel adjustment
The spur gearbox, which is adjustable via a handwheel, is made from an aluminium or grey cast iron housing and is available in various sizes. The combination of helical gearbox, variable speed gearbox and three-phase motor is available from an output of 0.25kW, 0.37kW, 0.55kW, 0.75kW, 1.1kW, 1.5kW to 2.2kW. The helical gearboxes with speed control can be ordered with the followingOutput shaft sizes: 20 mm, 25 mm, 30 mm and 35 mm. The geared motor with mechanical speed control can be used for installation positions M1, M2 and M4. As with any drive of this type, it must be ensured that the speed control is only used during operation.
Application examples
The variable speed geared motors are used extensively, for example in or on shredders, agitators, presses, feed augers, tubular augers, dosing augers, grain crushers, belt conveyors, chain conveyors, conveyor belts, etc.conveyors, chain conveyors, spiral conveyors, belt dryers, feed silos, washing systems, packaging machines, sawmills, in conveyor technology, the food industry and generally in plant and mechanical engineering.
Gear motor - purchasing advice
Professional support is essential, especially when purchasing a helical geared motor with handwheel speed control. In particular, we would like to draw your attention to our telephone advice and assistance with the product decision. We also offer a short delivery time due to our large stock of geared motors.
SEO=geared motor + handwheel adjustment