MV202/B5+V30-100-4 - 3,0 kW – 44-222 rpm Helical geared motor speed variator
Product information "MV202/B5+V30-100-4 - 3,0 kW – 44-222 rpm Helical geared motor speed variator"
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 3.0 kW, Speed= 44 - 222 rpm, Reduction with adjustment unit (i)= 6.3 – 31.5, only Ratio gear(i)= 4,50,
Torque (M²)= 89 – 178 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm,
Weight= 45,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
Important Information
This drive unit is a custom-made product. Returns or cancellations are not accepted!
All product photos are for illustrative purposes only. Technical specifications are subject to change.
| Control range: | here. 35 bis 230 rpm |
|---|---|
| Performance: | 3,0 kW |
| Shaft diameter: | 30 mm |
| Series: | M-series |
Downloads
Zubehör
Output flange for MN-F202/203 300 x 230 x 265 mm All product photos are non-binding examples! Technical changes reserved.