Brake motor BM3 100L - 1.5 kW-6pole-B35
£577.89
Available, delivery time: about 3-4 business days
Product information "Brake motor BM3 100L - 1.5 kW-6pole-B35"
Brake motor, Power= 1,5 kW, Speed= 1000 rpm
Type= B35, Shaft= 28 x 60 mm, Efficiency class= IE3, Efficiency= 82,5 %, Weight= 28,6 kg,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% gemäß VDE 0530), Temperature sensor= 3 x PTC-Thermistors,
Paint= RAL 5010 (gentian blue), Frequency= 50/60 Hertz, Degree of protection= IP55, Brake= 32 Nm, 230V with rectifier.
Housing= die-cast aluminum, insulation class= F (155°C),
Ball bearing = SKF, C&U or equivalent, Cooling = Axial fan (plastic), Motor feet = can be screwed on or unscrewed.
The Electric motor is suitable for use with frequency converters and complies with IEC 60034-30: 2008.
The spring-loaded brake brakes the Electro motor in de-energized state. In inverter mode, the brake is
resp. to control the brake rectifier externally. For manual unlocking, a manual override lever is optionally available.
The brake motor is suitable for both directions of rotation. All product photos are non-binding examples!
| Engine protection: | PTC thermistor 3-fold |
|---|---|
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 1,5 kW |
| Rotation speed: | 1000 rpm / 6 polig |
| Shaft diameter: | 28 mm |
| Type of construction: | B3 B5 (B35) |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 3 |
Accesories
Kaltleiterauslösegerät, Motorschutz, PTC-Auswertung Operating voltage：AC 220V Allowable volt tolerance：±20% Frequency：50～60Hz Self-consuming power：<0.8VA Allowable environment temperature：-30～70℃ Rated current of switch：7A Operating resistance：3KΩ (1±10%) Restoring resistance：1500～1800Ω Weight：0.2Kg
Special flange for Electro motors the size 71 Flange B5 in reduced version.Ø140 x 95 x 115 mm, (P x N x M)drilling= 4 x Ø10mm The special flanges do not fit the motors in a reduced size! ! only surcharge in exchange - not available individually!
Heating tape for a space heater for Electric motors size 100-112-132 The anti-condensation heater is used to prevent the formation of condensation to prevent during operational breaks.
Hand release for mechanically unlocking the brake Mounted on the engine or brake. Only in conjunction with a JS brake motor. Cannot be ordered individually! All product photos are non-binding examples! Technical changes reserved.
Brake coil 24V/DC, exchangeable. Available as an option for BMS series motors. ! Only an additional charge - not available separately! Image shows additional equipment "manual release"!All product photos are non-binding examples! Subject to technical changes.