CMRV090+V20 90L- 4- 1.5 kW- 20-100 rpm Worm gear variable speed motor
Product information "CMRV090+V20 90L- 4- 1.5 kW- 20-100 rpm Worm gear variable speed motor"
Worm variable speed gear motor, Power= 1.5 kW, Speed= 20 - 100 rpm,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),
Protection type= IP55, iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 702 mm,
Hollow shaft = 35 mm, motor speed = 4 poles, translation with adjustment unit (i) = 14 - 70
Transmission only worm gear (i) = 10, torque = 104 Nm - 195 Nm, service factor ( f.s.)= 1,
terminal box= above (rotatable), weight= 58 kg, color= RAL 5010 (gentian blue),
temperature sensor= 3 x PTC thermistor, gear housing = aluminum, ball bearing = SKF, C&U or equivalent,
Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should
cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008,
is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with
a cover cap. This can be ordered under the heading "Accessories". In accordance with VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel.
As usual with variable speed gears, speed control by turning the handwheel is only permitted during operation!
A change in speed while stationary can damage the stepless adjustment unit.
All product photos are non-binding examples! Technical changes reserved.
| Control range: | here. 20 bis 100 rpm |
|---|---|
| Performance: | 1,5 kW |
| Shaft diameter: | 35 mm |
| Series: | CMRV-series |
Accesories
Output flange for CMRV 040 Ø 200 x 130 x 165 mm. B5 Depth: 43 mm,, All product photos are non-binding examples! Technical changes reserved.
Hollow shaft cover cap for CMRV 090, plastic, black, All product photos are non-binding examples! Technical changes reserved.
Double output shaft with feather key for worm gear CMRV 090, 35 x 80mm, both sides All product photos are non-binding examples! Technical changes reserved.
Output flange for CMRV 090 Ø 210 x 152 x 175 mm. B5 All product photos are non-binding examples! Technical changes reserved.
Output flange for CMRV 040 Ø 210 x 152 x 175 mm. B5 Depth: 84 mm,, All product photos are non-binding examples! Technical changes reserved.
Output shaft with feather key for worm gear CMRV 090, 35 x 80mm All product photos are non-binding examples! Technical changes reserved.
Torque arm for CMRV 090 All product photos are non-binding examples! Technical changes reserved.