CMRV110 132S-6 - 3 kW - 60 rpm- Worm Gearbox Motor

Frequency inverter, VFD, 4.0 kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)                               

Frequency inverter iS7 – the all-rounder 3.7 kW, 3x400V, 8A, Braking resistor, EMC filter, IP21 , DC reactor, with control panel. ● Constant torque / variable torque for normal load and heavy load operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high-speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Delay of undervoltage trip) Under Load Trip ProtectionPMSM function (Permanent Magnet Synchronous Motor) Vector control without feedbackPower Braking & Flux Braking Function Automatic Setting:Autotuning of static engine parameters ● Easy to use:simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP]) *● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30PS])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic LCD control panel (6 different languages)● PLC PLC expansion card optional (Programmable Logic Control Card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/Output expansion card (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *● Software (Drive View) for monitoring and parameterization on the PC

Hollow shaft cover cap for CMRV 110, plastic, black, All product photos are non-binding examples! Technical changes reserved.

Double output shaft with feather key for worm gear CMRV 110, 42 x 80mm, both sides All product photos are non-binding examples! Technical changes reserved.

Output flange for CMRV 110 Ø 280 x 170 x 230 mm. B5 Depth: 106 mm, All product photos are non-binding examples! Technical changes reserved.

External fan, external fan unit, motor size 160 Insulation class F, protection class IP56, weight approx. 8 kg, multi-voltage. 1x230 V-50/60 Hz, 85 watts, 0.5/0.35 A, 1490/1730 rpm, x m3/h, capacitor 5µF3x230/400 V-50/60 Hz, 95/90 watts, 0.62/0.55 A, 1490/1790 rpm,3x400 V-50/60 Hz, 95/90 watts, 0.36/0.32 A, 1490/1750 rpm,Paint finish RAL5010, total length 280 mm, free dimension 155 mm, inner diameter 311 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.

External fan, external fan unit, motor size 180 Insulation class F, protection class IP56, weight approx. 10 kg, multi-voltage. 1x230 V-50/60 Hz, 165 watts, 0.69 A, 2800/3300 rpm, x m3/h, capacitor 6µF3x230/400 V-50/60 Hz, 140/230 watts, 0.4/0.6 A, 2800/3300 rpm,3x400 V-50/60 Hz, 140/230 watts, 0.23/0.36 A, 2800/3300 rpm,Paint finish RAL5010, total length 335 mm, clearance 210 mm, inner diameter 357 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.

External fan, external fan unit, motor size 200 Insulation class F, protection class IP56, weight approx. x.x kg, multi-voltage. 1x230 V-50/60 Hz, 165 watts, 0.69 A, 2800/3300 rpm, x m3/h, capacitor 6µF3x230/400 V-50/60 Hz, 140/230 watts, 0.4/0.6 A, 2800/3300 rpm,3x400 V-50/60 Hz, 140/230 watts, 0.23/0.36 A, 2800/3300 rpm,Paint finish RAL5010, total length 342 mm, clearance 217 mm, inner diameter 396 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.

External fan, external fan unit, motor size 225 Insulation class F, protection class IP56, weight approx. 18 kg, multi-voltage. 3x230/400 V-50/60 Hz, 110/170 watts, 0.47/0.51 A, 1460/1730 rpm,3x400 V-50/60 Hz, 110/170 watts, 0.27/0.3 A, 1460/1730 rpm,Paint finish RAL5010, total length 408 mm, clearance 213 mm, inner diameter 456 mm To install the external fan, it is necessary to remove the fan cover andthe fan blade. If an extension cannot be used,the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.

External fan, external fan unit, motor size 250 Insulation class F, protection class IP56, weight approx. 20 kg, multi-voltage. 3x230/400 V-50/60 Hz, 110/170 watts, 0.47/0.51 A, 1460/1730 rpm,3x400 V-50/60 Hz, 110/170 watts, 0.27/0.3 A, 1460/1730 rpm,Paint finish RAL5010, total length 426 mm, clearance 231 mm, inner diameter 504 mm To install the external fan, it is necessary to remove the fan cover andthe fan blade. If an extension cannot be used,the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.

External fan, external fan unit, motor size 280 Insulation class F, protection class IP56, weight approx. 26 kg, 2415 m³/h. 3x230/400 V-50/60 Hz, 0.255/0.3 watts, 1.5/1.1 A, 1450/1680 rpm,paint RAL5010, total length 475 mm, clearance 260 mm, inner diameter 556 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.

External fan, external fan unit, motor size 315 Insulation class F, protection class IP56, weight approx. 36 kg, 2415 m³/h. 3x230/400 V-50/60 Hz, 0.255/0.3 watts, 1.5/1.1 A, 1450/1680 rpm,paint RAL5010, total length 570 mm, clearance 340 mm, inner diameter 678 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.

External fan, external fan unit, motor size 132 Isoclass F, Protection class IP56, Weight 3.7kg, Multivoltage. 1x230 V-50 Hz, 45 watts, 0.45 A, 1450 rpm, 337 m3/h, capacitor 3µF1x240 V-60 Hz, 65 watts, 0.35 A, 1750 rpm, 337 m3/h, capacitor 3µF3x230/400 V-50 Hz, 55 watts, 0.4 A/0.23 A, 1450 rpm, 337 m3/h3x 254/460 V-60 Hz, 55 watts, 0.37/0.21 A, 1750 rpm, 337 m3/hPainted RAL5010, total length 225 mm, inner diameter 256 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

Frequency inverter, 4.0 kW, 380V- 400V- 420V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)                               

Output flange for CMRV 110 Ø 280 x 170 x 230 mm. B5 All product photos are non-binding examples! Technical changes reserved.

Output shaft with feather key for worm gear CMRV 110, 42 x 80mm All product photos are non-binding examples! Technical changes reserved.

Torque arm for CMRV 110 All product photos are non-binding examples! Technical changes reserved.