CMRV110+V30 100L- 4- 2.2 kW- 8-40 rpm Worm variable speed gear motor
Product information "CMRV110+V30 100L- 4- 2.2 kW- 8-40 rpm Worm variable speed gear motor"
Worm variable speed gear motor, Power= 2.2 kW, Speed= 8 – 40 rpm
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% in accordance with VDE 0530),
Protection class= IP55, insulation class= F (155°C), operating mode= S1, duty cycle= S1- 100%, total length= approx. 835 mm,
Hollow shaft= 42 mm, motor speed= 4 pole, gear ratio with adjustment unit (i)= 35 – 175,
Gear ratio only worm gear (i)= 25, torque= 364 Nm – 664 Nm, operating factor (f.s.)= 1,
Terminal box = top (rotatable), weight = 22 kg, color = RAL 5010 (gentian blue),
Temperature sensor = 3 x PTC thermistors, gear housing = aluminum, ball bearings = SKF, C&U or equivalent,
Cooling = axial fan (plastic). The drive complies with IEC 60034-30:2008,
is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts must be closed with a cover cap. This can be ordered under the "Accessories" section. In accordance with VDE 0105
or. According to IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel.
As is usual with variable speed drives, speed control by turning the handwheel is only permitted during operation!
A speed change when the drive is at a standstill can lead to damage to the stepless adjustment unit.
All product photos are non-binding examples! Technical changes reserved.
| Control range: | here. 8 bis 45 rpm |
|---|---|
| Performance: | 2,2 kW |
| Shaft diameter: | 42 mm |
| Series: | CMRV-series |
Downloads
Accesories
Output flange for CMRV 110 Ø 280 x 170 x 230 mm. B5 Depth: 106 mm, All product photos are non-binding examples! Technical changes reserved.
Hollow shaft cover cap for CMRV 110, plastic, black, All product photos are non-binding examples! Technical changes reserved.
Double output shaft with feather key for worm gear CMRV 110, 42 x 80mm, both sides All product photos are non-binding examples! Technical changes reserved.
Output flange for CMRV 110 Ø 280 x 170 x 230 mm. B5 All product photos are non-binding examples! Technical changes reserved.
Output shaft with feather key for worm gear CMRV 110, 42 x 80mm All product photos are non-binding examples! Technical changes reserved.
Torque arm for CMRV 110 All product photos are non-binding examples! Technical changes reserved.