DV973-180-4-22 kW-41 rpm Parallel shaft gearmotor
Product information "DV973-180-4-22 kW-41 rpm Parallel shaft gearmotor"
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 22 kW, Speed (n²)= 41 rpm, Ratio (i)= 33,93, Torque (M²)= 4882 Nm,
Operating factor (fs)= 3,7, Type= B3, Hollow shaft= 120 mm, Weight= 877 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The bevel gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructions
This drive is a custom-made product. A resignation or revocation of the purchase is excluded!
All product photos are non-binding examples!
| Performance: | 22 kW |
|---|---|
| Torque: | 3001 to 5000 Nm |
| Rotation speed: | 11 to 50 rpm |
| Shaft diameter: | 120 mm |
| Series: | D-series |
Downloads
- JS- DV972 / DV973- Maßzeichnung / Data sheet
- JS- Elektromotor M3 180L- Datenblatt / Data sheet
- JS- DV972 / DV973- M3 180L- Step
- JS- DV-Serie- Katalog / Catalog
- JS- DV-Serie- Betriebsanleitung
- JS- DV-series- Operating instructions
- JS- Elektromotoren- Betriebsanleitung
- JS- Electric motors- Operation instructions
Accesories
Output flange for parallel shaft gearmotor DV972, DV973, DV974, DV975 und DV976 Ø 660 x 550 x 600 mm. B5 All product photos are non-binding examples! Technical changes reserved.
Output shaft with feather key for parallel shaft gearmotor DV972, DV973, DV974, DV975 und DV976, 120 x 210 mm The shaft is permanently installed and can only be ordered with geared motor. All product photos are non-binding examples! Technical changes reserved.
Frequency converter, 22.0 kW, 3 x 400 Volt, IP20, built-in LED control panel, EMC filter (C3) Advanced sensorless control functions High starting torque of 200% even at 0.5 Hz High power density, compact dimensions, through-hole mounting Integrated EMC filter (C3) Compliance with global standards CE, UL, cUL Heavy duty 150% for 1 minute or normal duty 120% for 1 minute Autotuning function when stationary or rotating Optional protection class IP66/NEMA4X with integrated main switch (up to 22 kW) Safe stop "STO" integrated Torque Off), redundant input circuitry Integrated display with easy operation, external remote display possible Smart copy function, which does not require the S100 to be powered on Simple fan replacement, with the replacement time displayed automatically PLC sequences programmable with function blocks Digital and analog I/O, Modbus TCP, Ethernet/IP, Profibus DP, CANopen (in preparation: Profinet, EtherCAT)