Electric motor IE3 315L-8, 90 kW, 8 pol, B5
£6,077.99
Delivery time about 3-4 business days
Product information "Electric motor IE3 315L-8, 90 kW, 8 pol, B5"
Electric motor, Power=90 kW, Speed=750 rpm, Design=B5
Shaft=80 x 170 mm, Voltage=3 x 400/690 V-50 Hz, 3 x 480/830 V-60 Hz (± 5% according to VDE 0530),
Frequency=50/60 Hertz, Efficiency class=IE3, Efficiency=93.4%, Paint=RAL 5010 (gentian blue),
Protection class=IP55, Temperature sensor=3 x PTC thermistor, Weight=xx kg,
Operating mode=S1- 100% ED, Terminal box position=top, Housing=gray cast iron, Insulation class=F (155°C),
Ball bearings=SKF or equivalent, Cooling=axial fan (plastic), Motor feet=firmly cast (if available).
The engine mounting is designed for clutch operation. For belt drives, we recommend reinforced cylindrical roller bearings
The electric motor is for that Frequency inverter - Use and suitable for both directions of rotation.
According to VDE 0105 and IEC 364, all work on the electric drive can only be carried out by qualified personnel
to be carried out by qualified personnel. If you require modifications or special designs, please send an inquiry.
All product photos are non-binding examples! Technical changes reserved.
| Ambient temperature: | 40 °C |
|---|---|
| Engine protection: | PTC thermistor 3-fold |
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 90 kW |
| Shaft dimensions: | 80 x 170 mm |
| Rotation speed: | 750 rpm / 8 polig |
| Shaft diameter: | 80 mm |
| Type of construction: | B5 |
| Tension: | 3 x 400/690 V |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 3 |
Accesories
PTO temperature monitoring of the motor winding
Heating band for standstill heating in electric motors of size 250- 280- 315 The standstill heating is used to prevent the formation of condensation during breaks in operation.
Cylindrical roller bearing, A-side Reinforced bearing for electric motors of size 315 / 4-8 poles. To accommodate increased radial loads. Minimum load of 20% required!
Frequency inverter for pump / fan operation, 110 kW, 400V, IP20, EMC filter (C3) Specific functions for pumps and fans- MMC function (control of several motors)- Time switch function (time event: real-time clock)- flow compensation- gentle filling- Initial acceleration & final acceleration- valve down ramp- Pump cleaning- load balancing- Fire mode- Energy saving display (amortization counter)- Boost, wake-up function- U / f control- Integrated BACnet communication- LonWorks (optional)- Control panel especially for pumps / fans- Integrated EMC filter / DC reactor- Side by side installation- Intermediate plate option- Small size- Condenser / fan life monitoring function- Smart Copy function (flash drop, download of parameters andof the main operating system possible without Voltage) >
Performance data Rated current= 200 A, input voltage= 200 - 575 VAC, protection class= IP00, 110 kW,Installation altitude= <1000 m, dimensions (H x W x D)= 240 x 200 x 214 mm, weight= 4.0 kg, Settings • Current ramp - current value and ramp time• Current limitation of the electric motor• Trigger time for overload protection• Motor current FLC (full load current)• Ramp stop time• Expected motor start time• Auxiliary relay function Basic advantages • soft voltage start• easy voltage stop• built-in bypass• current limitation for soft start• soft start plus (limit values adjustable)• thermal motor protection• connection of a motor sensor (thermistor).• 2 relay outputs• protection against exceeding the start-up time All product photos are non-binding examples! Technical changes reserved.