KV273-80-4-0.75 kW-169 rpm Bevel Geared Motor
Product information "KV273-80-4-0.75 kW-169 rpm Bevel Geared Motor"
Bevel geared motor with IEC flange between gearbox and Electro motor
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0,75 kW, Speed (n²)= 169 rpm, Ratio (i)= 8,28, Torque (M²)= 40 Nm,
Operating factor (fs)= 4,0, Type= B3, Hollow shaft= 35 mm, Weight= 38 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The bevel gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructions
This drive is a custom-made product. A resignation or revocation of the purchase is excluded!
All product photos are non-binding examples!
| Performance: | 0,75 kW |
|---|---|
| Torque: | 26 to 50 Nm |
| Rotation speed: | 101 to 200 rpm |
| Shaft diameter: | 35 mm |
| Series: | K-series |
Downloads
- JS- KV272 / KV273- Maßzeichnung / Data sheet
- JS- Elektromotor- MX3 802- Datenblatt / Data sheet
- JS- KV272 / KV273 - MX80 - Step
- JS- K-Serie- Katalog / Catalog
- JS- KV-Serie- Betriebsanleitung
- JS- KV-series- Operating instructions
- JS- Elektromotoren- Betriebsanleitung
- JS- Electric motors- Operation instructions
Accesories
Output shaft with key father for helical gear reducer KV273, KV275 and KV276. 35 x 60 mm The shaft is permanently installed and can only be ordered with geared motor Please indicate the installation side (starting from installation position M1). All product photos are non-binding examples!
Torque arm for helical gear reducer KV273, KV275 and KV276. All product photos are non-binding examples! Technical changes reserved.
Output shaft with key father for helical gear reducer KV273, KV275 and KV276. 35 x 60 mm The shaft is permanently installed and can only be ordered with geared motor + flange.. Please indicate the installation side (starting from installation position M1). All product photos are non-binding examples!
Double output shaft with key father for helical gear reducer KV273, KV275 and KV276. 35 x 60 mm The shaft is permanently installed and can only be ordered with geared motor All product photos are non-binding examples!
Output flange for helical gear reducer KV273, KV275 and KV276. All product photos are non-binding examples! Technical changes reserved.
Double output shaft with key for bevel gearboxes KV273, KV275 and KV276. 35x60mm The shaft is permanently installed and can only be ordered with a geared motor + flange. All product photos are non-binding examples! Technical changes reserved.