Skip to main content Skip to search Skip to main navigation
Go to homepage

Single phase motor -ML2 100L-4, 3.0 kW, 4pol, B34

Product information "Single phase motor -ML2 100L-4, 3.0 kW, 4pol, B34"

Single-phase motor with Operating and starting capacitor

Power= 3.0 kW, Speed= 4 pole, Voltage= 1 x 230 V (± 5% according to VDE 0530), Design= B34,

Weight approx. 30.1 kg, Shaft = 28 x 60 mm, Frequency= 50 Hertz, Protection class= IP55, Operating mode= S1- 100% ED,

Temperature sensor= 1 x PTO thermal sensor, Cooling= axial fan (plastic). Insulation class= F (155°C),

Efficiency class= IE2, Efficiency= 85.5%, Terminal box= aluminum, Terminal box position= top,

Housing= die-cast aluminum, Ball bearings= SKF, C&U, or equivalent.

AC motors are suitable for both directions of rotation.


General:

Due to the start-up and Operating capacitor gives the 230V motor a stronger starting torque.

The starting capacitor is switched off by a starting relay when the Speed is reached.

Speed ​​control via Frequency converters or similar therefore leads to faults and is not permitted.


All product photos are non-binding examples! Technical changes reserved.

Ambient temperature: 40 °C
Engine protection: Thermocouple PTO- single
Flange dimensions: 160 x 110 x 130 mm
Frequency: 50 Hz
Installation altitude: 1000 m
Kühlungsart: IC 411
Operating mode: S1
Performance: 3,0 kW
Shaft dimensions: 28 x 60 mm
Rotation speed: 1500 rpm / 4 polig
Shaft diameter: 28 mm
Type of construction: B3 B14 (B34)
Tension: 1 x 230 V
Protection class: IP55
Direction of rotation: Left, Right
Efficiency Class: IE 2
Properties "Single phase motor -ML2 100L-4, 3.0 kW, 4pol, B34"
Ambient temperature: 40 °C
Engine protection: Thermocouple PTO- single
Flange dimensions: 160 x 110 x 130 mm
Frequency: 50 Hz
Installation altitude: 1000 m
Kühlungsart: IC 411
Operating mode: S1
Performance: 3,0 kW
Shaft dimensions: 28 x 60 mm
Rotation speed: 1500 rpm / 4 polig
Shaft diameter: 28 mm
Type of construction: B3 B14 (B34)
Tension: 1 x 230 V
Protection class: IP55
Direction of rotation: Left, Right
Efficiency Class: IE 2

Accesories

230V on/off switch with selector switch for left/right rotation
Motor switch (on-off) with selector switch right / left for 0.12 - 2.2kW at 1x 230V, for external installation, cable length approx. 90cm, Description:- Undervoltage release,- Switching capacity 16 A - 1x230V,- Ambient temperature -5°C to +40°C- Collar plug 1x230 V. Switching the direction of rotation only when the motor is at a standstill!

£50.10*
Heating tape 100-132
Heating tape for a space heater for Electric motors size 100-112-132 The anti-condensation heater is used to prevent the formation of condensation to prevent during operational breaks.

£130.44*
Protective roof (without hood) size 100
Protective roof (without hood) for electric motors in size 100 Diameter: Ø200 mm If ordered with a motor, the protective roof can also be delivered assembled. Please select. All product photos are non-binding examples! Technical changes reserved.

From £17.44*