Three-phase motor IE5 355L-6, 250 kW, 6 pole, B35
£25,863.06
Delivery time on demand
Product information "Three-phase motor IE5 355L-6, 250 kW, 6 pole, B35"
Electric motor, power=250 kW, speed=1000 rpm, design=B35
Shaft=100 x 210 mm, voltage=3 x 400/690 V-50 Hz, 3 x 480/830 V-60 Hz (± 5% according to VDE 0530), frequency=50/60 Hertz.
Efficiency class=IE5, efficiency=97.0%, paint finish=RAL 5010 (gentian blue), protection class=IP55, temperature sensor=3 x PTC thermistors,
Weight=1846.0 kg, operating mode=S1- 100% ED, terminal box position=top, housing=grey cast iron, insulation class=F (155°C), with relubrication device,
Ball bearing=SKF or equivalent, cooling=axial fan (plastic), motor feet=firmly moulded (if present).
The motor bearings are designed for clutch operation. For belt drive, we recommend reinforced cylindrical roller bearings
The electric motor is suitable for use with frequency inverters and for both directions of rotation.
In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel
Qualified personnel. For modifications or special designs, please send us an enquiry.
All product photos are non-binding examples! Subject to technical changes.
| Ambient temperature: | 40 °C |
|---|---|
| Engine protection: | PTC thermistor 3-fold |
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 250 kW |
| Shaft dimensions: | 100 x 210 mm |
| Rotation speed: | 1000 rpm / 6 polig |
| Shaft diameter: | 100 mm |
| Type of construction: | B3 B5 (B35) |
| Tension: | 3 x 400/690 V |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 5 |
Accessories
Motor mounting rails for size 315 - 355 Electric motors, with fixed clamping block,made of galvanized sheet steel. Total length: 1330 mmSlide length: 1065 mmWeight: approx. 64 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!
Certified and documented CSA/UL certificate 70197087 For gray cast iron motors up to IE3.