Three phase motor M1 160M-4 kW-8pole-B3
£323.90
Available, delivery time: about 3-4 business days
Product information "Three phase motor M1 160M-4 kW-8pole-B3"
Electro motor, Three-phase motor, Power= 4 kW, Speed= 750 rpm
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/60 Hertz.
Paint= RAL 5010 (gentian blue), Degree of protection= IP55, Temperature sensor= 3 x PTC thermistors,
Operating mode= S1- 100% DC, Terminal box position= top, Housing= Cast iron, Insulation class= F (155°C),
Ball bearing= SKF or equivalent, Cooling= axial fan (Plastic), Motor feet= fixed potted (if present).
The engine mounting is designed for clutch operation. We recommend reinforced Cylindrical roller bearings for belt drives.
The Electric motor is suitable for frequency converter use and for both directions of rotation.
According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified
specialist personnel. For modifications or special designs please send inquiry.
All product photos are non-binding examples! Technical changes reserved.
| Offers: | Special offers and clearance stock |
|---|---|
| Performance: | 4,0 kW |
| Rotation speed: | 750 rpm / 8 polig |
| Shaft diameter: | 42 mm |
| Type of construction: | B3 |
| Efficiency Class: | IE 1 |
Accesories
Kaltleiterauslösegerät, Motorschutz, PTC-Auswertung Operating voltage：AC 220V Allowable volt tolerance：±20% Frequency：50～60Hz Self-consuming power：<0.8VA Allowable environment temperature：-30～70℃ Rated current of switch：7A Operating resistance：3KΩ (1±10%) Restoring resistance：1500～1800Ω Weight：0.2Kg
PTO temperature monitoring of the motor winding
Heating band for a standstill heater for electric motors of size 160-180-200-225 The standstill heater is used to prevent the formation of condensation during breaks in operation.
Cylindrical roller bearing, A-side Reinforced bearing for electric motors of size 160. To accommodate increased radial loads. Minimum load of 20% required!