Three-phase motor MSP 132M – 4.5/3.0 kW – 4/8pol-B3
£989.88
Delivery time on demand
Product information "Three-phase motor MSP 132M – 4.5/3.0 kW – 4/8pol-B3"
Three-phase Electric motor, Power= 4,5/3.0 kW, Speed= 4/8 pole,
Type= B3, Voltage= 400 Volt, Frequency= 50 Hertz, Paint= RAL 5010 (gentian blue), Degree of protection = IP55
Temperature sensor = 3 x PTC-Thermistors, Weight= 56 kg, Shaft= 38 x 80 mm, Terminal box position = top,
Cable glands = 1 x M25, 1 x M16, Housing = Die-cast aluminum, Insulation class = F (155°C),
Ball bearing= SKF, C & U or Equivalent, Cooling= axial fan (plastic),
The Electric motor is suitable for both directions of rotation.
According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified
specialist personnel. For modifications or special designs please send inquiry.
Helpful tips on electric motors can be found in the FAQ section. All product photos are non-binding examples!
We reserve the right to make technical changes.
| Performance: | 4,5/3,0 kW |
|---|---|
| Rotation speed: | 1500/750 rpm switchable |
| Shaft diameter: | 38 mm |
| Type of construction: | B3 |
Accesories
Heating tape for a space heater for Electric motors size 100-112-132 The anti-condensation heater is used to prevent the formation of condensation to prevent during operational breaks.
External fan, external fan unit, motor size 160 Insulation class F, protection class IP56, weight approx. 8 kg, multi-voltage. 1x230 V-50/60 Hz, 85 watts, 0.5/0.35 A, 1490/1730 rpm, x m3/h, capacitor 5µF3x230/400 V-50/60 Hz, 95/90 watts, 0.62/0.55 A, 1490/1790 rpm,3x400 V-50/60 Hz, 95/90 watts, 0.36/0.32 A, 1490/1750 rpm,Paint finish RAL5010, total length 280 mm, free dimension 155 mm, inner diameter 311 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.
External fan, external fan unit, motor size 180 Insulation class F, protection class IP56, weight approx. 10 kg, multi-voltage. 1x230 V-50/60 Hz, 165 watts, 0.69 A, 2800/3300 rpm, x m3/h, capacitor 6µF3x230/400 V-50/60 Hz, 140/230 watts, 0.4/0.6 A, 2800/3300 rpm,3x400 V-50/60 Hz, 140/230 watts, 0.23/0.36 A, 2800/3300 rpm,Paint finish RAL5010, total length 335 mm, clearance 210 mm, inner diameter 357 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.
External fan, external fan unit, motor size 200 Insulation class F, protection class IP56, weight approx. x.x kg, multi-voltage. 1x230 V-50/60 Hz, 165 watts, 0.69 A, 2800/3300 rpm, x m3/h, capacitor 6µF3x230/400 V-50/60 Hz, 140/230 watts, 0.4/0.6 A, 2800/3300 rpm,3x400 V-50/60 Hz, 140/230 watts, 0.23/0.36 A, 2800/3300 rpm,Paint finish RAL5010, total length 342 mm, clearance 217 mm, inner diameter 396 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.
External fan, external fan unit, motor size 225 Insulation class F, protection class IP56, weight approx. 18 kg, multi-voltage. 3x230/400 V-50/60 Hz, 110/170 watts, 0.47/0.51 A, 1460/1730 rpm,3x400 V-50/60 Hz, 110/170 watts, 0.27/0.3 A, 1460/1730 rpm,Paint finish RAL5010, total length 408 mm, clearance 213 mm, inner diameter 456 mm To install the external fan, it is necessary to remove the fan cover andthe fan blade. If an extension cannot be used,the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.
External fan, external fan unit, motor size 250 Insulation class F, protection class IP56, weight approx. 20 kg, multi-voltage. 3x230/400 V-50/60 Hz, 110/170 watts, 0.47/0.51 A, 1460/1730 rpm,3x400 V-50/60 Hz, 110/170 watts, 0.27/0.3 A, 1460/1730 rpm,Paint finish RAL5010, total length 426 mm, clearance 231 mm, inner diameter 504 mm To install the external fan, it is necessary to remove the fan cover andthe fan blade. If an extension cannot be used,the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.
External fan, external fan unit, motor size 280 Insulation class F, protection class IP56, weight approx. 26 kg, 2415 m³/h. 3x230/400 V-50/60 Hz, 0.255/0.3 watts, 1.5/1.1 A, 1450/1680 rpm,paint RAL5010, total length 475 mm, clearance 260 mm, inner diameter 556 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.
External fan, external fan unit, motor size 315 Insulation class F, protection class IP56, weight approx. 36 kg, 2415 m³/h. 3x230/400 V-50/60 Hz, 0.255/0.3 watts, 1.5/1.1 A, 1450/1680 rpm,paint RAL5010, total length 570 mm, clearance 340 mm, inner diameter 678 mm To install the external fan, it is necessary to remove the fan cover and the fan blade. If an extension cannot be used, the shaft must be shortened. If ordered with a motor, the external fan can also be delivered assembled. Please select the version.
External fan, external fan unit, motor size 132 Isoclass F, Protection class IP56, Weight 3.7kg, Multivoltage. 1x230 V-50 Hz, 45 watts, 0.45 A, 1450 rpm, 337 m3/h, capacitor 3µF1x240 V-60 Hz, 65 watts, 0.35 A, 1750 rpm, 337 m3/h, capacitor 3µF3x230/400 V-50 Hz, 55 watts, 0.4 A/0.23 A, 1450 rpm, 337 m3/h3x 254/460 V-60 Hz, 55 watts, 0.37/0.21 A, 1750 rpm, 337 m3/hPainted RAL5010, total length 225 mm, inner diameter 256 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.
Fan cover with rain protection roof for Electric motors in size 132. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.
Kaltleiterauslösegerät, Motorschutz, PTC-Auswertung Operating voltage：AC 220V Allowable volt tolerance：±20% Frequency：50～60Hz Self-consuming power：<0.8VA Allowable environment temperature：-30～70℃ Rated current of switch：7A Operating resistance：3KΩ (1±10%) Restoring resistance：1500～1800Ω Weight：0.2Kg
Motor mounting rails for size 100- 112- 132 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 495 mmSlide length: 405 mmWeight: approx. 4,2 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!
Electric motor slide plate in size IEC 100 to 132 Dimensions: 380 x 240 x 33mm (LxWxH)Weight capacity: 92kgWeight: approx. 4.5kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!
Motor mounting rails for size 132 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 530 mmSlide length: 413 mmWeight: approx. 7.1kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!