Brake motor BM3 100L1 - 2.2 kW-4pole-B35
Product information "Brake motor BM3 100L1 - 2.2 kW-4pole-B35"
Brake motor, Power= 2,2 kW, Speed=1500 rpm
Type= B35, Shaft= 28 x 60 mm, Efficiency class= IE3, Efficiency= 86,7 %, Weight= 30,4 kg,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% gemäß VDE 0530), Temperature sensor= 3 x PTC-Thermistors,
Paint= RAL 5010 (gentian blue), Frequency= 50/60 Hertz, Degree of protection= IP55, Brake= 32 Nm, 230V with rectifier.
Housing= die-cast aluminum, insulation class= F (155°C),
Ball bearing = SKF, C&U or equivalent, Cooling = Axial fan (plastic), Motor feet = can be screwed on or unscrewed.
The Electric motor is suitable for use with frequency converters and complies with IEC 60034-30: 2008.
The spring-loaded brake brakes the Electro motor in de-energized state. In inverter mode, the brake is
resp. to control the brake rectifier externally. For manual unlocking, a manual override lever is optionally available.
The brake motor is suitable for both directions of rotation. All product photos are non-binding examples!
| Engine protection: | PTC thermistor 3-fold |
|---|---|
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 2,2 kW |
| Rotation speed: | 1500 rpm / 4 polig |
| Shaft diameter: | 28 mm |
| Type of construction: | B3 B5 (B35) |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 3 |
| Engine protection: | PTC thermistor 3-fold |
|---|---|
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 2,2 kW |
| Rotation speed: | 1500 rpm / 4 polig |
| Shaft diameter: | 28 mm |
| Type of construction: | B3 B5 (B35) |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 3 |
Accesories
