CMRV130 100L1-4 - 2.2 kW - 28 rpm- Worm Gearbox Motor
Product information "CMRV130 100L1-4 - 2.2 kW - 28 rpm- Worm Gearbox Motor"
Worm Gear Motor, Power= 2,2 kW, Speed= 28 rpm
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% In according to the VDE 0530),
Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,
Hollow shaft= 45mm, Mounting position= M1-M6. Engine Speed= 4 pole, Ratio (i)= 50, Torque= 563 Nm,
Service factor (f.s.)= 1,7 . Terminal box= top (rotatable), Weight= 73 kg , Paint= RAL 5010 (gentian blue),
Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent,
Cooling= axial fan (plastic). The worm geared motor is suitable for frequency converter use and
complies with IEC 60034-30: 2008. The geared motor can be operated in both directions and contains
an oil filling on delivery. In according to the VDE 0105 bzw. IEC 364 all work on the electric drive must only becarried out by qualified
specialist personnel. For modifications or special designs please send inquiry.
All product photos are non-binding examples! Technical changes reserved.
When ordering, please select the desired mounting position and design!
| Performance: | 2,2 kW |
|---|---|
| Torque: | 501 to 1000 Nm |
| Rotation speed: | 11 to 50 rpm |
| Shaft diameter: | 45 mm |
| Type of construction: | Standard worm gear |
| Series: | CMRV-series |
Downloads
- JS- CMRV130- Maßzeichnung / Data sheet
- JS- Elektromotor- MX3 100L1- Datenblatt / Data sheet
- JS- CMRV130- MX100L- Step
- JS- CMRV-Serie- Katalog / Catalog
- JS- CMRV-Serie- Betriebsanleitung
- JS- CMRV-Serie Operating instructions
- JS- Elektromotoren- Betriebsanleitung
- JS- Electric motors- Operation instructions
Accesories
Frequency inverter , 2.2 kW, 1 x 230V, 10.0A, IP20, EMC filter integrated - EMC filter C2- Potentiometer for speed control- Attachment to mounting plates or DIN rail- Side-by-side installation possible (2 mm distance between the FU)- Easy connection via RJ45 port- Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V)- Brake chopper for 1.5kW and 2.2kW versions- Overload capacity 150% for 1 min- Programming with DriveView9 operating software via RJ45 connection on the M100(Advanced only! The standard version does not have an RJ45 interface! Please select version.) Excerpt from spec. Features:- DC braking- Jog operation- 3-wire operation- Dwell operation (dwell time operation)- Slip compensation- PID control- Energy saving operation- Speed search- Automatic restart 2.2kW frequency converter , 230V, available at short notice!
Frequency inverter, 2.2 kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)
Frequency inverter, 2.2 kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)
Output flange for CMRV 130 Ø 320 x180 x 255 mm. B5 All product photos are non-binding examples! Technical changes reserved.
Output shaft with feather key for worm gear CMRV 130, 45 x 80mm All product photos are non-binding examples! Technical changes reserved.
Torque arm for CMRV 130 All product photos are non-binding examples! Technical changes reserved.
External fan, external fan unit, Motor size 100 Isoclass F, Protection class IP56, Weight 3.7kg, Multivoltage. 1x230 V-50 Hz, 45 watts, 0.19 A, 2900 rpm, 142 m3/h, capacitor 3µF1x240 V-60 Hz, 55 watts, 0.23 A, 3400 rpm, 142 m3/h, capacitor 3µF3x230/400 V-50 Hz, 40 watts, 0.19 A/0.12 A, 2900 rpm, 142 m3/h3x 254/460 V-60 Hz, 55 watts, 0.19/0.11 A, 3400 rpm, 142 m3/hPainted RAL5010, total length 185 mm, inner diameter 197 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.
Frequency inverter, 2.2 kW, 380V- 400V- 420V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection,Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)
Hollow shaft cover cap for CMRV 150, plastic, black, All product photos are non-binding examples! Technical changes reserved.
Double output shaft with feather key for worm gear CMRV 130, 45 x 80mm, both sides All product photos are non-binding examples! Technical changes reserved.
Engine options
single-phase option in 1x230V-50Hz, for worm geared motors with 2,2kW-Motor in 4pole version, with Operating and starting capacitor. ! Always operate drive only under load, starting torque lower than with three-phase motor ! ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examples!optional:On / off switch with reversing switch for left / right rotation, undervoltage release,Collar plug = 1 x 230 V, switching capacity = 16 A, ambient temperature = -5 ° C to + 40 ° C,Line between motor and switch housing = approx. 90 cm.
Brakemotor-Option 2.2 kW – 4pol for worm gear motor. Brake= 32 Nm 230V with rectifire. ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examplesAll product photos are non-binding examples!