CMRV150/063 DC600, 12V, 0.8 kW, 3.2 rpm, IP66 Worm gear motor
Product information "CMRV150/063 DC600, 12V, 0.8 kW, 3.2 rpm, IP66 Worm gear motor"
Double worm gear with DC motor, IP66, Power= 0.8 kW, Speed= 3.2 rpm
Voltage= 1 x 12 Volt, Protection class= gear IP55, motor IP66, Current consumption= 12V/94.4 A,
Operating mode = S2 (short-term operation), Hollow shaft= 50 mm, Motor speed= 2 poles, Gear ratio (i)= 900,
Torque= 970 Nm, operating factor (f.s.)= 2.0, connection= Clamp bolt, weight= 104.5 kg.
The gear motor can be operated in both directions of rotation and is filled with oil when delivered.
According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified specialist personnel.
From gear size 110, the installation position must be specified.
All product photos are non-binding examples!
| Performance: | 0,80 kW |
|---|---|
| Torque: | 501 to 1000 Nm |
| Rotation speed: | 1 to 4.9 rpm |
| Shaft diameter: | 50 mm |
| Type of construction: | Double worm gear |
| Tension: | 12 V DC |
| Protection class: | IP66 |
| Series: | CMRV-series |
Accesories
Double output shaft with feather key for worm gear CMRV 130, 45 x 80mm, both sides All product photos are non-binding examples! Technical changes reserved.
Output shaft with feather key for worm gear CMRV 150, 50 x 82mm All product photos are non-binding examples! Technical changes reserved.
Output flange for CMRV 150 Ø 320 x 180 x 255 mm. B5 All product photos are non-binding examples! Technical changes reserved.
Double output shaft with feather key for worm gear CMRV 150, 50 x 82mm, both sides All product photos are non-binding examples! Technical changes reserved.
Hollow shaft cover cap for CMRV 150, plastic, black, All product photos are non-binding examples! Technical changes reserved.
Torque arm for CMRV 150 All product photos are non-binding examples! Technical changes reserved.