DC motor EC350, 24V, 0,50 kW- 2pol- B14, IP40, IEC63
Product information "DC motor EC350, 24V, 0,50 kW- 2pol- B14, IP40, IEC63"
DC motor, Voltage= 24 V-DC, Shaft 11x23 mm,
Operating mode= S2 (short-term operation), Weight= 5.3 kg, Current consumption= 24V/29.4A,
Motor speed= 2-pole, Connection= clamping bolt, Flange 90x60x75 mm,
Protection class= IP40, also available with brake (in IP20, 24 V-DC).
In accordance with VDE 0105 or IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel.
All product photos are non-binding examples! Technical changes reserved.
| Flange dimensions: | 90 x 60 x 75 mm |
|---|---|
| For size: | BG 63 |
| Operating mode: | S2 |
| Performance: | 0,50 kW |
| Shaft dimensions: | 11 x 23 mm |
| Rotation speed: | 3000 rpm / 2 polig |
| Shaft diameter: | 11 mm |
| Type of construction: | B14 |
| Tension: | 24 V DC |
| Protection class: | IP40 |
| Direction of rotation: | Left, Right |
Properties "DC motor EC350, 24V, 0,50 kW- 2pol- B14, IP40, IEC63"
| Flange dimensions: | 90 x 60 x 75 mm |
|---|---|
| For size: | BG 63 |
| Operating mode: | S2 |
| Performance: | 0,50 kW |
| Shaft dimensions: | 11 x 23 mm |
| Rotation speed: | 3000 rpm / 2 polig |
| Shaft diameter: | 11 mm |
| Type of construction: | B14 |
| Tension: | 24 V DC |
| Protection class: | IP40 |
| Direction of rotation: | Left, Right |
Zubehör
DC motor control 40 A without control box
£415.63*
Speed control for DC motors
The PLN40 speed control is suitable for DC motors up to500 W / 40 A.Extensive control variants of the DC motor are possible. These can be found in the catalog included in the download.
Dimensions: 146 mm x 177 mm x 34 mm
DC Motor on and off times:- Acceleration time: 0.5 - 10 sec- Deceleration time: 0.5 - 10 sec
Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.
DC motor control 40 A with control box
£899.67*
Speed control for DC motors in the control box
Pre-wired DC motor control unit with potentiometer (5–10 kΩ), left-off-right rotation switch and motor control mounted in the control box. The speed control is suitable for DC motorsup to 500 W / 40 A .
Motor switch-on and switch-off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec
Special features:Room temperature: 0°C / +40°C (alarm below zero)
Dimensions:350 mm x 250 mm x 155 mmAttention: Individual electrical protection must be carried out on site by qualified personnel!
Alle Produktfotos sind unverbindliche Beispiele! Technische Änderungen vorbehalten.