MV-F172-90L-4 - 1.5kW - 8 to 98 rpm helical gearbox + VFD motor ED400

Spur gear motor with integrated frequency converter EASYdrive ED400

Power= 1.5 kW, speed= 8 to 98 rpm, gear ratio (i)= 17.14, torque (M²)= 168 Nm, operating factor (fs)= 1.2.
Design= B3 (B35 for an additional charge), shaft= 25x50 mm, weight= 33.4 kg, color= RAL5010,
Temperature sensor= 3 x PTC thermistors.

Please select the desired installation position when ordering!

Frequency converter
Power= 1.5 kW, size= A, input voltage= 3 x 400V +10% (three-phase), input frequency= 50/60 Hz,
Output frequency = 0- 400 Hz, EMC filter = C2, protection class = IP65, dimensions = 233mm x 153mm x 120mm,
Mains current (input) = 3.3 A. Ideal control range = 5- 60 Hz, with constant nominal torque, below 30 Hz an external fan is required for cooling.

Product information
The frequency converter optionally offers the option of becoming "bus-capable" with the help of fieldbus modules.
With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos, the EASYdrive offers
compatibility with almost all common control environments. The customer can select the bus system relevant to them and thus integrate the EASYdrive ideally into the control environment of their application. The required optional control variant must be specified when ordering. The EASYdrive drive controllers are CE, UL and CSA certified. The EASYdrive complies with EMC class C2 (with 3-phase mains supply) or C1 (with 1-phase mains supply) without the need for external filtering measures.
Possible variant selection!

Product selection
When selecting the frequency converter, please note that there are 3 variants. This includes firstly the device
in standard design, secondly the device with a membrane keyboard and thirdly the device with an MMI control unit.

The "frequency converter in standard design" shown is fully usable and contains a side-mounted potentiometer, but requires a corresponding control unit for control.
One of the following options must be ordered for this:
- External control unit (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The "frequency converter with membrane keyboard" variant contains a built-in potentiometer and offers the option of controlling the
FU directly, e.g. start-stop, left-right run, etc.

One of the following options must also be ordered for parameterization:
- External Control unit (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The "Frequency converter with MMI control unit" variant does not require an optional control unit,
and a display is also included in the device cover. The options mentioned can be used if required.

Important information
This drive is a custom-made product. Withdrawal or cancellation of the purchase is excluded!
All product photos are non-binding examples! Technical changes reserved.