MV003/B5+V05-71-4 - 0,25 kW – 8,5-41 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.25 kW, Speed= 8.5 - 41 rpm, Reduction with adjustment unit (i)= 33.8 – 168.9, only Ratio gear(i)= 24,13,
Torque (M²)= 58 - 116 Nm, Service factor (fs)= 1.0 – 2.1.Type= B3 (B35 gegen Aufpreis), Welle= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£627.31*
MV003/B5+V05-71-4 - 0,25 kW – 6,5-31 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.25 kW, Speed= 6.5 - 31 rpm, Reduction with adjustment unit (i)= 44.8 - 224, only Ratio gear(i)= 32,02,
Torque (M²)= 51 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£627.31*
MV003/B5+V05-71-4 - 0,25 kW – 10-48 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.25 kW, Speed= 10 - 48 rpm, Reduction with adjustment unit (i)= 28.9 – 144.6 only Ratio gear(i)= 20,66,
Torque (M²)= 33 – 66 Nm, Service factor (fs)= 1.2 – 2.4, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£627.31*
MV002/B5+V05-71-4 - 0,37 kW – 37-175 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 37 - 175 rpm, Reduction with adjustment unit (i)= 8 - 38, only Ratio gear(i)= 5,57,
Torque (M²)= 13 - 26 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£628.24*
MV002/B5+V05-71-4 – 0,37kW – 52-233 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 52-233 rpm, Reduction with adjustment unit (i)= 6 - 27, only Ratio gear(i)= 3,90,
Torque (M²)= 9 -18 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£628.24*
MV002/B5+V05-71-4 - 0,37 kW – 26-127 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 26 - 127 rpm, Reduction with adjustment unit (i)= 11 – 54, only Ratio gear(i)= 7,84,
Torque (M²)= 19 - 38 Nm, Service factor (fs)= 1.9 – 3.8, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£628.24*
MV002/B5+V05-71-4 - 0,37 kW – 14-29 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 14 - 29 rpm, Reduction with adjustment unit (i)= 10 – 48, only Ratio gear(i)= 6,91,
Torque (M²)= 17 - 34 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£628.24*
MV002/B5+V05-71-4 - 0,37 kW – 21-100 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 21 - 100 rpm, Reduction with adjustment unit (i)= 14 – 69, only Ratio gear(i)= 9,87,
Torque (M²)= 24 – 48 Nm, Service factor (fs)= 1.6 - 3.3, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£628.24*
MV003/B5+V05-71-4 - 0,37 kW – 10-48 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.37 kW, Speed= 9 - 48 rpm, Reduction with adjustment unit (i)= 29 - 144, only Ratio gear(i)= 20.66,
Torque (M²)= 49 - 100 Nm, Service factor (fs)= 0.85 - 1.7, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20.7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED.
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£633.90*
MV002/B5+V10-80-4 - 0,55 kW – 27-127 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.55 kW, Speed= 27 - 127 rpm, Reduction with adjustment unit (i)= 11 – 52, only Ratio gear(i)= 7,45,
Torque (M²)= 27 - 54 Nm, Service factor (fs)= 1.3 -2.7, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= ca.22.2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£713.71*
MV002/B5+V10-80-4 - 0,55 kW – 18-87 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.55 kW, Speed= 18 - 87 rpm, Reduction with adjustment unit (i)= 16 - 77, only Ratio gear(i)= 11,14,
Torque (M²)= 40 - 80 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 22.2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£713.71*
MV273/B5+V05-71-4 - 0,37 kW – 1,5-7 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.37 kW, Speed= 1.5 - 7 rpm, Reduction with adjustment unit (i)= 193.9 – 969.8, only Ratio gear(i)= 138,55,
Torque (M²)= 327 - 654 Nm, Service factor (fs)= 0.7 – 1.4, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm,
Weight, = 34.8 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£884.47*
MV002/B5+V20-90L-4 - 1,5 kW – 37-218 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.5 kW, Speed= 37 - 218 rpm, Reduction with adjustment unit (i)= 6.4 – 37.4, only Ratio gear(i)= 4,56,
Torque (M²)= 45 – 90 Nm, Service factor (fs)= 0.65 – 1.3, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 29,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£899.16*
MV002/B5+V20-90L-4 - 1,5 kW – 47-276 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.5 kW, Speed= 47 - 276 rpm, Reduction with adjustment unit (i)= 5.06 – 29.6, only Ratio gear(i)= 3,62,
Torque (M²)= 36 - 72 Nm, Service factor (fs)= 0.75 – 1.5, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 29,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£899.16*
MV102/B5+V20-90S-4 - 1,1 kW – 31-181 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.1 kW, Speed= 31 - 181 rpm, Reduction with adjustment unit (i)= 7.7 – 44.8, only Ratio gear(i)= 5,47,
Torque (M²)= 39 – 78 Nm, Service factor (fs)= 1.0 – 2.0, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 28,7 kg, Paint= RAL5010, ,Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£904.93*
MV102/B5+V20-90L-4 - 1,5 kW – 37-218 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.5 kW, Speed= 37 - 218 rpm, Reduction with adjustment unit (i)= 6.4 – 37.5, only Ratio gear(i)= 4,57,
Torque (M²)= 45 - 90 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 31,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£938.80*
MV273/B5+V10-80-4 - 0,55 kW – 3-10 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.55 kW, Speed= 3 - 10 rpm, Reduction with adjustment unit (i)= 135 – 675, only Ratio gear(i)= 96,52,
Torque (M²)= 339 – 678 Nm, Service factor (fs)= 0.65 – 1.3, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm.
Weight, = 38,1 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£962.15*
MV202/B5+V20-90S-4 - 1,1 kW – 7,5-43 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.1 kW, Speed= 7.5 - 43 rpm, Reduction with adjustment unit (i)= 32.2 – 188.7, only Ratio gear(i)= 23,01,
Torque (M²)= 165 - 330 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm,
Weight, = 34,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£1,050.03*
MV202/B5+V20-90S-4 - 1,1 kW – 9-53 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.1 kW, Speed= 9 - 53 rpm, Reduction with adjustment unit (i)= 26.4 – 154.5, only Ratio gear(i)= 18,85,
Torque (M²)= 135 - 270 Nm, Service factor (fs)= 0.95 – 1.9, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm,
Weight, = 34,7kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£1,050.03*
MV273/B5+V20-90S-4 - 1,1 kW – 4-23 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.1 kW, Speed= 4 - 23 rpm, Reduction with adjustment unit (i)= 59 – 347, only Ratio gear(i)= 42,41,
Torque (M²)= 301 -602 Nm, Service factor (fs)= 0.75 – 1.5, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm.
Weight, = 40,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£1,112.33*
MV272/B5+V20-90L-4 - 1,5 kW – 6,7-38 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.5 kW, Speed= 6.7 - 38 rpm, Reduction with adjustment unit (i)= 36.2 – 212.3, only Ratio gear(i)= 25,89,
Torque (M²)= 254 - 508 Nm, Service factor (fs)= 0.9 – 1.8, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm,
Weight, = 43,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£1,146.19*
MV172/B5+V30-100-4 - 2,2 kW – 30-152 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 2.2 kW, Speed= 30 - 152 rpm, Reduction with adjustment unit (i)= 9.2 – 46.2, only Ratio gear(i)= 6,60,
Torque (M²)= 96 – 192 Nm, Service factor (fs)= 0.75 – 1.5, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 37,2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£1,191.49*
MV172/B5+V30-100-4 - 3,0 kW – 42-208 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 3.0 kW, Speed= 42 - 208 rpm, Reduction with adjustment unit (i)= 6.7 – 33, only Ratio gear(i)= 4,78
Torque (M²)= 95 - 190 Nm, Service factor (fs)= 0.7 – 1.4, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 40.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£1,239.35*
MV172/B5+V30-100-4 - 3,0 kW – 59-297 rpm Helical geared motor speed variator
Helical geared motor with handwheel speed control
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 3.0 kW, Speed= 59 - 297 rpm, Reduction with adjustment unit (i)= 4.7 – 23.6, only Ratio gear(i)= 3,38,
Torque (M²)= 67 – 134 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 40.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples! Technical changes reserved.
£1,239.35*
Gear motor and handwheel adjustment
The spur gearbox, which is adjustable via a handwheel, is made from an aluminium or grey cast iron housing and is available in various sizes. The combination of helical gearbox, variable speed gearbox and three-phase motor is available from an output of 0.25kW, 0.37kW, 0.55kW, 0.75kW, 1.1kW, 1.5kW to 2.2kW. The helical gearboxes with speed control can be ordered with the followingOutput shaft sizes: 20 mm, 25 mm, 30 mm and 35 mm. The geared motor with mechanical speed control can be used for installation positions M1, M2 and M4. As with any drive of this type, it must be ensured that the speed control is only used during operation.
Application examples
The variable speed geared motors are used extensively, for example in or on shredders, agitators, presses, feed augers, tubular augers, dosing augers, grain crushers, belt conveyors, chain conveyors, conveyor belts, etc.conveyors, chain conveyors, spiral conveyors, belt dryers, feed silos, washing systems, packaging machines, sawmills, in conveyor technology, the food industry and generally in plant and mechanical engineering.
Gear motor - purchasing advice
Professional support is essential, especially when purchasing a helical geared motor with handwheel speed control. In particular, we would like to draw your attention to our telephone advice and assistance with the product decision. We also offer a short delivery time due to our large stock of geared motors.
SEO=geared motor + handwheel adjustment