Worm Gear Motor, Power= 0,18 KW, Speed= 9 to 110 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 14mm, Engine Speed= 4 pole, Ratio (i)= 15, Torque= 14 Nm,Service factor (f.s.)= 1,3 . Terminal box= top (rotatable), Weight= 6 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 14 to 168 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 14mm, Engine Speed= 4 pole, Ratio (i)= 10, Torque= 10 Nm,Service factor (f.s.)= 1,8 . Terminal box= top (rotatable), Weight= 6 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 28 to 336 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 14mm, Engine Speed= 4 pole, Ratio (i)= 5, Torque= 5,3 Nm,Service factor (f.s.)= 3,4 . Terminal box= top (rotatable), Weight= 6 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 6 to 67 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 25, Torque= 23 Nm,Service factor (f.s.)= 1,7 . Terminal box= top (rotatable), Weight= 6,8 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 4 to 42 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 40, Torque= 32 Nm,Service factor (f.s.)= 1,3 . Terminal box= top (rotatable), Weight= 6,8 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples! Technical changes reserved.

Worm Gear Motor, Power= 0,37 KW, Speed= 14 to 168 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 10, Torque= 21 Nm,Service factor (f.s.)= 1,9 . Terminal box= top (rotatable), Weight= 8,3 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environmentson. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).                  ! Possible variant selection!      Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,37 KW, Speed= 9 to 110 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 15, Torque= 31 Nm,Service factor (f.s.)= 1,3 . Terminal box= top (rotatable), Weight= 8,3 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,37 KW, Speed= 28 to 336 rpmDegree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 5, Torque= 11 Nm,Service factor (f.s.)= 3 . Terminal box= top (rotatable), Weight= 8,3 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 4 to 42 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 40, Torque= 33 Nm,Service factor (f.s.)= 2,3 . Terminal box= top (rotatable), Weight= 8 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,37 KW, Speed= 6 to 67 rpmDegree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 25, Torque= 48 Nm,Service factor (f.s.)= 1,5 . Terminal box= top (rotatable), Weight= 9,5 kg , Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,37 KW, Speed= 7 to 84 rpmDegree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 20, Torque= 40 Nm,Service factor (f.s.)= 1,8 . Terminal box= top (rotatable), Weight= 9,5 kg , Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,55 KW, Speed= 9 to 110 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 15, Torque= 46 Nm,Service factor (f.s.)= 1,6 . Terminal box= top (rotatable), Weight= 12,5 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.55 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 5.8 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,55 KW, Speed= 6 to 67 rpmDegree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 25, Torque= 71 Nm,Service factor (f.s.)= 1 . Terminal box= top (rotatable), Weight= 12,5 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.55 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 5.8 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,37 KW, Speed= 4 to 42 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 40, Torque= 71 Nm,Service factor (f.s.)= 2,1 . Terminal box= top (rotatable), Weight= 12,2 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.37 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 6 to 67 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 14mm, Engine Speed= 4 pole, Ratio (i)= 25, Torque= 21 Nm,Service factor (f.s.)= 1 . Terminal box= top (rotatable), Weight= 6 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,55 KW, Speed= 28 to 336 rpmDegree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 5, Torque= 17 Nm,Service factor (f.s.)= 3,7 . Terminal box= top (rotatable), Weight= 12,5 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.55 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 5.8 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,55 KW, Speed= 14 to 168 rpmDegree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 10, Torque= 32 Nm,Service factor (f.s.)= 2,2 . Terminal box= top (rotatable), Weight= 12,5 kg , Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.55 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 5.8 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,75 KW, Speed= 28 to 336 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 5, Torque= 23 Nm,Service factor (f.s.)= 2,7 . Terminal box= top (rotatable), Weight= 15,5 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.75 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 7.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,75 KW, Speed= 14 to 168 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 10, Torque= 44 Nm,Service factor (f.s.)= 1,6 . Terminal box= top (rotatable), Weight= 15,5 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.75 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 7.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 7 to 84 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 20, Torque= 19 Nm,Service factor (f.s.)= 2 . Terminal box= top (rotatable), Weight= 6,8 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,55 KW, Speed= 6 to 67 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 25, Torque= 73 Nm,Service factor (f.s.)= 1,8 . Terminal box= top (rotatable), Weight= 15,2 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.55 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 5.8 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,18 KW, Speed= 4 to 20 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 100, Torque= 60 Nm,Service factor (f.s.)= 0,9 . Terminal box= top (rotatable), Weight= 8 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.25 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 70mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,75 KW, Speed= 9 to 110 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 15, Torque= 63 Nm,Service factor (f.s.)= 1,2 . Terminal box= top (rotatable), Weight= 15,5 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.75 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 7.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!

Worm Gear Motor, Power= 0,75 KW, Speed= 7 to 84 rpm, Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,Hollow shaft= 25mm, Engine Speed= 4 pole, Ratio (i)= 20, Torque= 83 Nm,Service factor (f.s.)= 1,6 . Terminal box= top (rotatable), Weight= 18,2 kg, Paint= RAL 5010 (gentian blue),Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent, Frequency inverterPower= 0.75 KW, Size= alpha, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 187mm x 126mm x 80mm,Mains current (input)= 7.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With Modbus (already included) and CANopen, the EASYdrive alpha provides compatibility with control environments.The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the controlenvironment of its application.The required optional control variant must be specified for orders.The EASYdrive lastswithout external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).   ! Possible variant selection!      Product selection When selecting the frequency converter, make sure that there are 2 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard. Both versions include a potentiometerinstalled on the side.The illustrated "frequency converter in standard version" is fully usable, but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!