Frequency Inverter, 3x 400V, EASYdrive with Electric motor, 18.5 kW Electric motor Power= 18.5 kW, Speed= 4 pole, Shaft= 48 x 110 mm, Total Weight= 194 kg,Type= B3, Input Voltage= 3 x 400 V- 50 Hz, 3 x 460 V- 60 Hz (± 5% according to VDE 0530),Frequency= 50/60 hertz, Painting= RAL 5010 (gentian blue), Degree of protection = IP55,Temperature sensor= 3 x PTC thermistor, Terminal box position= top, Housing= Die-cast aluminium,Insulation class= F (155°C), Ball bearing= SKF, C & U, o. Equivalent, Cooling= axial fan (plastic),Frequency InverterPower= 18.5 kW, Size= D, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 414mm x 294mm x 232mm,Mains current (input)= 33.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency inverter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application. The required optional control variant must be specified for orders. The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).                            Possible variant selection! Product selection When selecting the frequency inverter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency inverter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter  The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!18.5 kW motor with frequency inverter, infinitely variable!

Frequency Inverter, 3x400V, EASYdrive with Electric motor, 22 kW Electric motor Power= 22 kW, Speed= 4 pole, Shaft= 48 x 110 mm, Total Weight= 212 kg,Type= B3, Input Voltage= 3 x 400 V- 50 Hz, 3 x 460 V- 60 Hz (± 5% according to VDE 0530),Frequency= 50/60 hertz, Painting= RAL 5010 (gentian blue), Degree of protection = IP55,Temperature sensor= 3 x PTC thermistor, Terminal box position= top, Housing= Die-cast aluminium,Insulation class= F (155°C), Ball bearing= SKF, C & U, o. Equivalent, Cooling= axial fan (plastic),Frequency InverterPower= 22 kW, Size= D, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 414mm x 294mm x 232mm,Mains current (input)= 39.8 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application. The required optional control variant must be specified for orders. The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). Possible variant selection! Product selection When selecting the frequency inverter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency inverter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter  The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.     Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!22kW motor with frequency inverter, infinitely variable!