Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 11 kW, Speed (n²)= 15 rpm, Ratio (i)= 92,80, Torque (M²)= 6593 Nm, Operating factor (fs)= 2,3, Type= B3, Hollow shaft= 110 mm, Weight= 741 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18,5 kW, Speed (n²)= 15 rpm, Ratio (i)= 92,80, Torque (M²)= 11092 Nm, Operating factor (fs)= 1,4, Type= B3, Hollow shaft= 110 mm, Weight= 804 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18,5 kW, Speed (n²)= 32 rpm, Ratio (i)= 43,22, Torque (M²)= 5192 Nm, Operating factor (fs)= 2,8, Type= B3, Hollow shaft= 110 mm, Weight= 804 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 15 rpm, Ratio (i)= 92,80, Torque (M²)= 13191 Nm, Operating factor (fs)= 1,1, Type= B3, Hollow shaft= 110 mm, Weight= 844 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 32 rpm, Ratio (i)= 43,22, Torque (M²)= 6175 Nm, Operating factor (fs)= 2,4, Type= B3, Hollow shaft= 110 mm, Weight= 844 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 32 rpm, Ratio (i)= 43,22, Torque (M²)= 8421 Nm, Operating factor (fs)= 1,8, Type= B3, Hollow shaft= 110 mm, Weight= 868 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 20 rpm, Ratio (i)= 70,76, Torque (M²)= 13730 Nm, Operating factor (fs)= 1,1, Type= B3, Hollow shaft= 110 mm, Weight= 868 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 58 rpm, Ratio (i)= 24,28, Torque (M²)= 4755 Nm, Operating factor (fs)= 3,0, Type= B3, Hollow shaft= 110 mm, Weight= 868 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 41 rpm, Ratio (i)= 34,28, Torque (M²)= 8261 Nm, Operating factor (fs)= 1,7, Type= B3, Hollow shaft= 110 mm, Weight= 970 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 25 rpm, Ratio (i)= 55,53, Torque (M²)= 13327 Nm, Operating factor (fs)= 1,1, Type= B3, Hollow shaft= 110 mm, Weight= 970 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 73 rpm, Ratio (i)= 19,26, Torque (M²)= 4665 Nm, Operating factor (fs)= 2,8, Type= B3, Hollow shaft= 110 mm, Weight= 970 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 114 rpm, Ratio (i)= 12,25, Torque (M²)= 2969 Nm, Operating factor (fs)= 2,8, Type= B3, Hollow shaft= 110 mm, Weight= 970 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 32 rpm, Ratio (i)= 43,22, Torque (M²)= 12633 Nm, Operating factor (fs)= 1,2, Type= B3, Hollow shaft= 110 mm, Weight= 1002 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 83 rpm, Ratio (i)= 16,78, Torque (M²)= 4951 Nm, Operating factor (fs)= 2,5, Type= B3, Hollow shaft= 110 mm, Weight= 1002 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 127 rpm, Ratio (i)= 11,05, Torque (M²)= 3263 Nm, Operating factor (fs)= 2,5, Type= B3, Hollow shaft= 110 mm, Weight= 1002 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 58 rpm, Ratio (i)= 24,28, Torque (M²)= 7133 Nm, Operating factor (fs)= 2,0, Type= B3, Hollow shaft= 110 mm, Weight= 1002 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 83 rpm, Ratio (i)= 16,78, Torque (M²)= 6052 Nm, Operating factor (fs)= 2,1, Type= B3, Hollow shaft= 110 mm, Weight= 1093 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 32 rpm, Ratio (i)= 43,22, Torque (M²)= 15440 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 110 mm, Weight= 1093 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 58 rpm, Ratio (i)= 24,28, Torque (M²)= 8719 Nm, Operating factor (fs)= 1,6, Type= B3, Hollow shaft= 110 mm, Weight= 1093 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 127 rpm, Ratio (i)= 11,05, Torque (M²)= 3988 Nm, Operating factor (fs)= 2,0, Type= B3, Hollow shaft= 110 mm, Weight= 1093 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 75 kW, Speed (n²)= 127 rpm, Ratio (i)= 11,05, Torque (M²)= 5439 Nm, Operating factor (fs)= 1,5, Type= B3, Hollow shaft= 110 mm, Weight= 1280 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 75 kW, Speed (n²)= 58 rpm, Ratio (i)= 24,28, Torque (M²)= 11890 Nm, Operating factor (fs)= 1,2, Type= B3, Hollow shaft= 110 mm, Weight= 1280 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 75 kW, Speed (n²)= 83 rpm, Ratio (i)= 16,78, Torque (M²)= 8253 Nm, Operating factor (fs)= 1,5, Type= B3, Hollow shaft= 110 mm, Weight= 1280 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Bevel geared motor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 90 kW, Speed (n²)= 58 rpm, Ratio (i)= 24,28, Torque (M²)= 14269 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 110 mm, Weight= 1350 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
The bevel geared motor for your application
JS-Technik GmbH specialises in extensive challenges in the field of professional drive technology with a focus on bevel gearboxes, electric motors and frequency inverters.
Helical bevel gearbox with three-phase motor
Extensive range of bevel gearboxes
This is just a small selection of the many possible combinations in our gearbox shop. You will find power ratings of 0.12kW, 0.25kW, 0.55kW, 0.75kW, 1.1kW, 1.5kW, 2.2kW, 3.0kW, 4.0kW, 5.5kW, 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 37kW, 45kW, 55kW, 75kW and 90kW. Our bevel gearboxes are characterised by special application possibilities. For example, they are available in 14 different sizes up to 165,000 Nm and are available with a parallel axis or a bevel gear input stage. The bevel gearboxes have the following cooling options: Water heat exchanger, air heat exchanger, cooling coil or a fan. There is also a pressure lubrication option, a hydraulic clutch or an integrated brake between the AC motor and gearbox. We also offer an integrated backstop, an electromagnetic brake, a shrink disc or a special shaft with a multi-spline profile in accordance with DIN 5480.
Bevel geared motor with pressure equalisation tank
The special features of the bevel gearbox
The generously dimensioned working shaft and bearings, the gear wheels made of high-quality case-hardened steel and a long service life should be emphasised here. The gearboxes are also available in an Atex version.
Bevel geared motor with torque support (plate) at the top
Structure of the bevel geared motors
A bevel gearbox consists of a bevel gear and a bevel pinion. The axes are often offset by 90°, other angles are possible. These bevel gearboxes are used where high reduction ratios, torques and movements are required. They are usually driven via the bevel pinion, and left and right directions of rotation are possible. The transmission ratio is the quotient of the number of teeth z2 of the bevel gear by the number of teeth z1 of the bevel pinion. Self-locking as in a worm gear does not occur. Bevel gearboxes are used as power gearboxes in presses, in rolling mills, in machine tool construction and in automation. In other words, wherever movements and forces are transmitted at an angle.
SEO=The bevel geared motor for your application, bevel geared motor 1.1-1.5-2.2-3-4-5.5-7.5KW