Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.37 kW, speed=75 rpm, transmission ratio (i)=18.2, torque (M²)=43 Nm, service factor (fs)=1.9, Type=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=17.7kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.37 kW, speed=101 rpm, transmission ratio (i)=13.61, torque (M²)=32 Nm, service factor (fs)=2.5, Type=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=17.7kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.25 kW, speed=28 rpm, transmission ratio (i)=32.02, torque (M²)=79 Nm, service factor (fs)=1.0, Type=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=18kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.18 kW, speed=27 rpm, transmission ratio (i)=50.51, torque (M²)=58 Nm, service factor (fs)=2.4, Type=B3 (B5 at extra cost), shaft=25mm x 50mm, weight=17.8kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.18 kW, speed=40 rpm, transmission ratio (i)=35.21, torque (M²)=40 Nm, service factor (fs)=3.5, Type=B3 (B5 at extra cost), shaft=25mm x 50mm, weight=17.8kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.18 kW, speed=30 rpm, transmission ratio (i)=44.60, torque (M²)=51 Nm, service factor (fs)=2.7, Type=B3 (B5 at extra cost), shaft=25mm x 50mm, weight=17.8kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.37 kW, speed=97 rpm, transmission ratio (i)=14.08, torque (M²)=34 Nm, service factor (fs)=3.2, Type=B3 (B5 at extra cost), shaft=25mm x 50mm, weight=19.2kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.37 kW, speed=104 rpm, transmission ratio (i)=13.15, torque (M²)=32 Nm, service factor (fs)=3.3, Type=B3 (B5 at extra cost), shaft=25mm x 50mm, weight=19.2kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistor, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.37 kW, speed=86 rpm, transmission ratio (i)=15.95, torque (M²)=38 Nm, service factor (fs)=3.0, Type=B3 (B5 at extra cost), shaft=25mm x 50mm, weight=19.2kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.75 kW, speed=710 rpm, transmission ratio (i)=3.9, torque (M²)=10Nm, service factor (fs)=4.0 Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20.1kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.75 kW, speed=462 rpm, transmission ratio (i)=6, torque (M²)=15 Nm, service factor (fs)=3.5, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20.1kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.75 kW, speed=497 rpm, transmission ratio (i)=5.57, torque (M²)=14 Nm, service factor (fs)=3.7, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20.1kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.75 kW, speed=608 rpm, transmission ratio (i)=4.56, torque (M²)=11Nm, service factor (fs)=4.0 Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20.1kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.75 kW, speed=790 rpm, transmission ratio (i)=3.62, torque (M²)=9 Nm, service factor (fs)=4.0 Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20.1kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.75 kW, speed=401 rpm, transmission ratio (i)=6.91, torque (M²)=17 Nm, service factor (fs)=3.2, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20.1kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.55 kW, speed=300 rpm, transmission ratio (i)=4.56, torque (M²)=16 Nm, service factor (fs)=3.5, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.55 kW, speed=198 rpm, transmission ratio (i)=6.91, torque (M²)=25 Nm, service factor (fs)=2.8, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.55 kW, speed=139 rpm, transmission ratio (i)=9.87, torque (M²)=35 Nm, service factor (fs)=2.2, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.55 kW, speed=246 rpm, transmission ratio (i)=5.57, torque (M²)=20 Nm, service factor (fs)=3.2, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor with possibility of flange mounting from B3 to B35Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.Power= 0,55 kW, Speed= 188 upm, Ratio (i)= 7,45, Torque (M²)= 27 Nm, Service factor (fs)= 2,7. Type = B3 (B35 for an extra charge), Shaft= 20x40 mm, Weight= ca.19,2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED, Terminal box = top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! Technical changes reserved. When ordering, please select the desired mounting position and design!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.55 kW, speed=175 rpm, transmission ratio (i)=7.84, torque (M²)=28 Nm, service factor (fs)=2.6, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.55 kW, speed=351 rpm, transmission ratio (i)=3.9, torque (M²)=14 Nm, service factor (fs)=3.9, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.55 kW, speed=162 rpm, transmission ratio (i)=8.45, torque (M²)=30 Nm, service factor (fs)=2.4, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motor (gearbox with IEC flange to electric motor) Voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), frequency=50/ 60 Hertz. Power=0.55 kW, speed=158 rpm, transmission ratio (i)=8.7, torque (M²)=31 Nm, service factor (fs)=2.4, Design=B3 (B5 at extra cost), shaft=20mm x 40mm, weight=20kg, paint finish=RAL5010. Temperature sensor=3 x PTC thermistors, operating mode=S1- 100% ED, terminal box=top (rotatable). The geared motor is suitable for frequency inverter operation and complies with IEC 60034-30:2008. The helical gearbox can be operated in both directions of rotation and is supplied with an oil filling. In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel Qualified personnel. For modifications or special designs, please send us an enquiry. Important notes This drive is a customised product. Cancellation or withdrawal from the purchase is excluded!All product photos are non-binding examples! Subject to technical changes. Please select the desired installation position and version when ordering!
Helical geared motors from the specialist
JS-Technik GmbH specialises in extensive challenges in the field of professional drive technology with a focus on geared motors, electric motors and frequency inverters. Thanks to our large stock of geared motors, we can offer you a particularly short delivery time. The standard foot-mounted (B3) and foot-flange-mounted (B3 / B5) designs are available from stock.
Drive technology with advantages
The helical gearboxes are available in various speeds, i.e. from less than 1-1000 revolutions per minute (rpm, rpm, rpm). In many cases, helical geared motors are also required as special motors with customised requirements. We are the ideal partner for you here, because with decades of experience and our own final assembly, we can cover a wide range. Thanks to their high quality, our geared motors offer you low maintenance, high availability and maximum operational reliability.
Helical geared motor with forced cooling fan
Performance of helical geared motors
On the pages of our geared motor online shop, you will find a selection of helical geared motors from specialist companies in a wide range of revolutions per minute, i.e. in rpm, rpm, rpm, min-1. The geared motors are infinitely variable in combination with a frequency inverter. They are available in the standard sizeswith an output of 0.12kW, 0.18kW, 0.25kW, 0.55kW, 0.75kW, 1.1kW, 1.5kW, 2.2kW, 3.0kW, 4.0kW, 5.5kW, 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 45kW, 55kW, 75kW and 90kW.
Installation positions of helical gearboxes with three-phase motor
The JS-Technik professional geared motor can be installed in any required position, such as horizontally or vertically. To meet your requirements, you can choose between the installation positions M1 - M6. Due to the high interchangeability of the geared motor components, you as a customer benefit from a wide range of options, including reduced costs, faster delivery times and easier maintenance.
Helical geared motor with flange mounting
Helical geared motor
Whether geared motor with brake motor, special shaft, special voltage, as helical geared motor or in explosion-proof design: top quality, a competent team and a competitive price are our top priorities. The geared motor catalogue and operating instructions can be found in the download directory.
Geared motor with integrated frequency inverter
Your geared motor partner
If you cannot find your geared motor here in the online shop, please send us an enquiry by email or simply contact us directly by phone. For larger quantities in the B2C or B2B sector, simply send us your requirements and you will receive a top offer from us.
SEO: Helical geared motors from the specialist