Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 11 kW, Speed (n²)= 32 rpm, Ratio (i)= 44,27, Torque (M²)= 3165 Nm, Operating factor (fs)= 0,9, Type= B3, Hollow shaft= 60 mm, Weight= 230 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 118 rpm, Ratio (i)= 11,89, Torque (M²)= 1180 Nm, Operating factor (fs)= 2,3, Type= B3, Hollow shaft= 60 mm, Weight= 231 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 58 rpm, Ratio (i)= 24,02, Torque (M²)= 2375 Nm, Operating factor (fs)= 1,3, Type= B3, Hollow shaft= 60 mm, Weight= 231 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 217 rpm, Ratio (i)= 6,45, Torque (M²)= 642 Nm, Operating factor (fs)= 2,8, Type= B3, Hollow shaft= 60 mm, Weight= 231 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 320 rpm, Ratio (i)= 4,38, Torque (M²)= 437 Nm, Operating factor (fs)= 3,4, Type= B3, Hollow shaft= 60 mm, Weight= 231 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18,5 kW, Speed (n²)= 217 rpm, Ratio (i)= 6,45, Torque (M²)= 792 Nm, Operating factor (fs)= 2,2, Type= B3, Hollow shaft= 60 mm, Weight= 255 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18,5 kW, Speed (n²)= 58 rpm, Ratio (i)= 24,02, Torque (M²)= 2929 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 60 mm, Weight= 255 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18,5 kW, Speed (n²)= 89 rpm, Ratio (i)= 15,67, Torque (M²)= 1914 Nm, Operating factor (fs)= 1,6, Type= B3, Hollow shaft= 60 mm, Weight= 255 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18,5 kW, Speed (n²)= 134 rpm, Ratio (i)= 10,45, Torque (M²)= 1281 Nm, Operating factor (fs)= 2,0, Type= B3, Hollow shaft= 60 mm, Weight= 255 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18,5 kW, Speed (n²)= 320 rpm, Ratio (i)= 4,38, Torque (M²)= 539 Nm, Operating factor (fs)= 2,7, Type= B3, Hollow shaft= 60 mm, Weight= 255 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2,2 kW, Speed (n²)= 11 rpm, Ratio (i)= 124,53, Torque (M²)= 1764 Nm, Operating factor (fs)= 2,4, Type= B3, Hollow shaft= 70 mm, Weight= 228 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2,2 kW, Speed (n²)= 8,3 rpm, Ratio (i)= 167,96, Torque (M²)= 2376 Nm, Operating factor (fs)= 1,8, Type= B3, Hollow shaft= 70 mm, Weight= 228 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2,2 kW, Speed (n²)= 6,3 rpm, Ratio (i)= 221,47, Torque (M²)= 3125 Nm, Operating factor (fs)= 1,4, Type= B3, Hollow shaft= 70 mm, Weight= 228 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3 kW, Speed (n²)= 6,3 rpm, Ratio (i)= 221,47, Torque (M²)= 4264 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 70 mm, Weight= 230 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3 kW, Speed (n²)= 11 rpm, Ratio (i)= 124,53, Torque (M²)= 2407 Nm, Operating factor (fs)= 1,8, Type= B3, Hollow shaft= 70 mm, Weight= 230 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3 kW, Speed (n²)= 8,3 rpm, Ratio (i)= 167,96, Torque (M²)= 3242 Nm, Operating factor (fs)= 1,3, Type= B3, Hollow shaft= 70 mm, Weight= 230 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 11 rpm, Ratio (i)= 124,53, Torque (M²)= 3211 Nm, Operating factor (fs)= 1,3, Type= B3, Hollow shaft= 70 mm, Weight= 230 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 8,3 rpm, Ratio (i)= 167,96, Torque (M²)= 4324 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 70 mm, Weight= 230 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5,5 kW, Speed (n²)= 15 rpm, Ratio (i)= 91,19, Torque (M²)= 3236 Nm, Operating factor (fs)= 1,3, Type= B3, Hollow shaft= 70 mm, Weight= 240 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5,5 kW, Speed (n²)= 41 rpm, Ratio (i)= 34,02, Torque (M²)= 1219 Nm, Operating factor (fs)= 3,5, Type= B3, Hollow shaft= 70 mm, Weight= 240 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5,5 kW, Speed (n²)= 32 rpm, Ratio (i)= 44,27, Torque (M²)= 1581 Nm, Operating factor (fs)= 2,7, Type= B3, Hollow shaft= 70 mm, Weight= 240 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5,5 kW, Speed (n²)= 20 rpm, Ratio (i)= 69,18, Torque (M²)= 2462 Nm, Operating factor (fs)= 1,7, Type= B3, Hollow shaft= 70 mm, Weight= 240 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5,5 kW, Speed (n²)= 11 rpm, Ratio (i)= 124,53, Torque (M²)= 4415 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 70 mm, Weight= 240 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5,5 kW, Speed (n²)= 24 rpm, Ratio (i)= 59,34, Torque (M²)= 2113 Nm, Operating factor (fs)= 2,0, Type= B3, Hollow shaft= 70 mm, Weight= 240 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft geared motor / shaft mounted geared motor
Electric motors with parallel shaft gearboxes from JS-Technik work extremely efficiently. They are characterised by a flat design and can therefore be integrated perfectly into applications where space is at a premium. Available in 10 sizes, the JS-Technik parallel shaft geared motors cover a torque range from 130 Nm to 180,000 Nm with an output of 0.12 kW to 160 kW. The speed range is 0.1 rpm - 350 rpm (revolutions per minute). In combination with JS frequency inverters, parallel shaft geared motors enable a wide range of system solutions with maximum efficiency and economy.
Parallel shaft gearbox with directly mounted 75KW electric motor
Shaft-mounted geared motors
Shaft-mounted gearboxes can be worm gearboxes, helical bevel gearboxes and parallel shaft gearboxes, which can be mounted on a shaft to be driven and secured with a torque arm, among other things.
Shrink discs
The hollow shaft is often designed with a shrink disc without a feather key instead of a feather key. The power range of these gearboxes starts at a few Nm and extends up to 180,000 Nm. The ratio range lies between single-stage gearboxes with a very low reduction ratio up to multi-stage high reduction ratios.
Geared motor installation positions
The JS-Technik offset geared motors / shaft-mounted geared motors can be installed in any required position, such as horizontally or vertically. To take the desired application into account here, please select between M1 - M6 using the diagram enclosed in the online shop.
Certificates and versions
Geared motor certification in accordance with international standards such as NEMA, IEC, CSA, UL, CE, GOST-R and Atex ensures worldwide acceptance.
Flat geared motor quality
The generously dimensioned working shaft and bearings, gear wheels made of high-quality case-hardened steel and the enclosed housing design ensure an exceptionally long service life.
SEO: Parallel shaft geared motors / slip-on motors