Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 27 rpm, Ratio (i)= 51,94, Torque (M²)= 7427 Nm, Operating factor (fs)= 1,8, Type= B3, Hollow shaft= 110 mm, Weight= 581 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 16 rpm, Ratio (i)= 87,95, Torque (M²)= 12522 Nm, Operating factor (fs)= 3,4, Type= B3, Hollow shaft= 110 mm, Weight= 581 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 53 rpm, Ratio (i)= 26,66, Torque (M²)= 3835 Nm, Operating factor (fs)= 3,4, Type= B3, Hollow shaft= 110 mm, Weight= 581 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 20 rpm, Ratio (i)= 68,62, Torque (M²)= 13359 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 110 mm, Weight= 603 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 79 rpm, Ratio (i)= 17,67, Torque (M²)= 3471 Nm, Operating factor (fs)= 3,2, Type= B3, Hollow shaft= 110 mm, Weight= 603 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 40 rpm, Ratio (i)= 35,24, Torque (M²)= 6900 Nm, Operating factor (fs)= 1,9, Type= B3, Hollow shaft= 110 mm, Weight= 603 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 60 rpm, Ratio (i)= 23,44, Torque (M²)= 4605 Nm, Operating factor (fs)= 2,8, Type= B3, Hollow shaft= 110 mm, Weight= 603 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 172 rpm, Ratio (i)= 8,12, Torque (M²)= 2430 Nm, Operating factor (fs)= 3,2, Type= B3, Hollow shaft= 110 mm, Weight= 644 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 128 rpm, Ratio (i)= 10,97, Torque (M²)= 3277 Nm, Operating factor (fs)= 3,1, Type= B3, Hollow shaft= 110 mm, Weight= 644 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 25 rpm, Ratio (i)= 55,01, Torque (M²)= 13241 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 110 mm, Weight= 638 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 103 rpm, Ratio (i)= 13,58, Torque (M²)= 3300 Nm, Operating factor (fs)= 3,1, Type= B3, Hollow shaft= 110 mm, Weight= 638 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 53 rpm, Ratio (i)= 26,66, Torque (M²)= 6452 Nm, Operating factor (fs)= 2,0, Type= B3, Hollow shaft= 110 mm, Weight= 638 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 31 rpm, Ratio (i)= 45,41, Torque (M²)= 13303 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 110 mm, Weight= 660 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 79 rpm, Ratio (i)= 17,67, Torque (M²)= 5208 Nm, Operating factor (fs)= 2,1, Type= B3, Hollow shaft= 110 mm, Weight= 660 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 46 rpm, Ratio (i)= 30,50, Torque (M²)= 8963 Nm, Operating factor (fs)= 1,5, Type= B3, Hollow shaft= 110 mm, Weight= 660 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 128 rpm, Ratio (i)= 10,97, Torque (M²)= 4006 Nm, Operating factor (fs)= 2,5, Type= B3, Hollow shaft= 110 mm, Weight= 750 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 247 rpm, Ratio (i)= 5,66, Torque (M²)= 2077 Nm, Operating factor (fs)= 3,2, Type= B3, Hollow shaft= 110 mm, Weight= 750 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 11 kW, Speed (n²)= 9 rpm, Ratio (i)= 153,87, Torque (M²)= 10932 Nm, Operating factor (fs)= 1,6, Type= B3, Hollow shaft= 120 mm, Weight= 830 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 11 kW, Speed (n²)= 15 rpm, Ratio (i)= 93,91, Torque (M²)= 6694 Nm, Operating factor (fs)= 2,7, Type= B3, Hollow shaft= 120 mm, Weight= 830 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 60 rpm, Ratio (i)= 23,44, Torque (M²)= 8443 Nm, Operating factor (fs)= 1,5, Type= B3, Hollow shaft= 110 mm, Weight= 766 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 40 rpm, Ratio (i)= 35,24, Torque (M²)= 12651 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 110 mm, Weight= 766 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 15 rpm, Ratio (i)= 93,91, Torque (M²)= 9130 Nm, Operating factor (fs)= 2,0, Type= B3, Hollow shaft= 120 mm, Weight= 841 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 10 rpm, Ratio (i)= 136,23, Torque (M²)= 13191 Nm, Operating factor (fs)= 1,4, Type= B3, Hollow shaft= 120 mm, Weight= 841 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 22 rpm, Ratio (i)= 63,36, Torque (M²)= 6177 Nm, Operating factor (fs)= 2,9, Type= B3, Hollow shaft= 120 mm, Weight= 841 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft geared motor / shaft mounted geared motor
Electric motors with parallel shaft gearboxes from JS-Technik work extremely efficiently. They are characterised by a flat design and can therefore be integrated perfectly into applications where space is at a premium. Available in 10 sizes, the JS-Technik parallel shaft geared motors cover a torque range from 130 Nm to 180,000 Nm with an output of 0.12 kW to 160 kW. The speed range is 0.1 rpm - 350 rpm (revolutions per minute). In combination with JS frequency inverters, parallel shaft geared motors enable a wide range of system solutions with maximum efficiency and economy.
Parallel shaft gearbox with directly mounted 75KW electric motor
Shaft-mounted geared motors
Shaft-mounted gearboxes can be worm gearboxes, helical bevel gearboxes and parallel shaft gearboxes, which can be mounted on a shaft to be driven and secured with a torque arm, among other things.
Shrink discs
The hollow shaft is often designed with a shrink disc without a feather key instead of a feather key. The power range of these gearboxes starts at a few Nm and extends up to 180,000 Nm. The ratio range lies between single-stage gearboxes with a very low reduction ratio up to multi-stage high reduction ratios.
Geared motor installation positions
The JS-Technik offset geared motors / shaft-mounted geared motors can be installed in any required position, such as horizontally or vertically. To take the desired application into account here, please select between M1 - M6 using the diagram enclosed in the online shop.
Certificates and versions
Geared motor certification in accordance with international standards such as NEMA, IEC, CSA, UL, CE, GOST-R and Atex ensures worldwide acceptance.
Flat geared motor quality
The generously dimensioned working shaft and bearings, gear wheels made of high-quality case-hardened steel and the enclosed housing design ensure an exceptionally long service life.
SEO: Parallel shaft geared motors / slip-on motors