Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 7.5 kW, Speed (n²)= 20 rpm, Ratio (i)= 71.72, Torque (M²)= 3085 Nm, Operating factor (fs)= 3.0, Type= B5, Shaft= 90 mm x 170 mm, Weight= 201 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 7.5 kW, Speed (n²)= 9.3 rpm, Ratio (i)= 158.18, Torque (M²)= 6738 Nm, Operating factor (fs)= 1.6, Type= B5, Shaft= 90 mm x 170 mm, Weight= 201 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 7.5 kW, Speed (n²)= 6.2 rpm, Ratio (i)= 235.99, Torque (M²)= 9944 Nm, Operating factor (fs)= 1.1, Type= B5, Shaft= 90 mm x 170 mm, Weight= 201 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 7.5 kW, Speed (n²)= 14 rpm, Ratio (i)= 104.32, Torque (M²)= 4471 Nm, Operating factor (fs)= 2.3, Type= B5, Shaft= 90 mm x 170 mm, Weight= 201 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18.5 kW, Speed (n²)= 32 rpm, Ratio (i)= 46.50, Torque (M²)= 5141 Nm, Operating factor (fs)= 1.0, Type= B5, Shaft= 80 mm x 130 mm, Weight= 291 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18.5 kW, Speed (n²)= 46 rpm, Ratio (i)= 31.88, Torque (M²)= 3557 Nm, Operating factor (fs)= 1.7, Type= B5, Shaft= 80 mm x 130 mm, Weight= 291 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18.5 kW, Speed (n²)= 65 rpm, Ratio (i)= 22.67, Torque (M²)= 2538 Nm, Operating factor (fs)= 2.1, Type= B5, Shaft= 80 mm x 130 mm, Weight= 291 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18.5 kW, Speed (n²)= 114 rpm, Ratio (i)= 12,96, Torque (M²)= 1450 Nm, Operating factor (fs)= 3.2, Type= B5, Shaft= 80 mm x 130 mm, Weight= 291 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1.1 kW, Speed (n²)= 1.2 rpm, Ratio (i)= 1172.80, Torque (M²)= 6455 Nm, Operating factor (fs)= 1.9, Type= B5, Shaft= 90 mm x 170 mm, Weight= 164 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 4.3 rpm, Ratio (i)= 338.80, Torque (M²)= 7535 Nm, Operating factor (fs)= 1.1, Type= B5, Shaft= 90 mm x 170 mm, Weight= 186 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 6.2 rpm, Ratio (i)= 235.99, Torque (M²)= 5322 Nm, Operating factor (fs)= 2.0, Type= B5, Shaft= 90 mm x 170 mm, Weight= 186 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 9.2 rpm, Ratio (i)= 158.18, Torque (M²)= 3606 Nm, Operating factor (fs)= 3.0, Type= B5, Shaft= 90 mm x 170 mm, Weight= 186 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1.5 kW, Speed (n²)= 2.2 rpm, Ratio (i)= 651.26, Torque (M²)= 5081 Nm, Operating factor (fs)= 2.5, Type= B5, Shaft= 90 mm x 170 mm, Weight= 166 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1.5 kW, Speed (n²)= 1.2 rpm, Ratio (i)= 1172.80, Torque (M²)= 8802 Nm, Operating factor (fs)= 1.4, Type= B5, Shaft= 90 mm x 170 mm, Weight= 166 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5.5 kW, Speed (n²)= 3.4 rpm, Ratio (i)= 430.31, Torque (M²)= 12373 Nm, Operating factor (fs)= 1.0, Type= B5, Shaft= 90 mm x 170 mm, Weight= 198 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 32 rpm, Ratio (i)= 46.50, Torque (M²)= 6114 Nm, Operating factor (fs)= 0.9, Type= B5, Shaft= 80 mm x 130 mm, Weight= 309 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 46 rpm, Ratio (i)= 31.88, Torque (M²)= 4230 Nm, Operating factor (fs)= 1.4, Type= B5, Shaft= 80 mm x 130 mm, Weight= 309 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 56 rpm, Ratio (i)= 26.35, Torque (M²)= 3505 Nm, Operating factor (fs)= 1.6, Type= B5, Shaft= 80 mm x 130 mm, Weight= 309 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 82 rpm, Ratio (i)= 18.06, Torque (M²)= 2407 Nm, Operating factor (fs)= 2.1, Type= B5, Shaft= 80 mm x 130 mm, Weight= 309 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2.2 kW, Speed (n²)= 2.2 rpm, Ratio (i)= 651.26, Torque (M²)= 7452 Nm, Operating factor (fs)= 1.7, Type= B5, Shaft= 90 mm x 170 mm, Weight= 172 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2.2 kW, Speed (n²)= 1.6 rpm, Ratio (i)= 913.87, Torque (M²)= 10228 Nm, Operating factor (fs)= 1.2, Type= B5, Shaft= 90 mm x 170 mm, Weight= 172 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 11 kW, Speed (n²)= 31 rpm, Ratio (i)= 46.73, Torque (M²)= 3070 Nm, Operating factor (fs)= 2.4, Type= B5, Shaft= 90 mm x 170 mm, Weight= 291 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3.0 kW, Speed (n²)= 1.9 rpm, Ratio (i)= 756.31, Torque (M²)= 11701 Nm, Operating factor (fs)= 1.1, Type= B5, Shaft= 90 mm x 170 mm, Weight= 175 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3.0 kW, Speed (n²)= 2.8 rpm, Ratio (i)= 519.96, Torque (M²)= 8186 Nm, Operating factor (fs)= 1.5, Type= B5, Shaft= 90 mm x 170 mm, Weight= 175 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary geared motor in various designs
Planetary geared motors are available up to 75kW and are used today in various areas with high torque requirements and compact designs. The modular planetary gearboxes consist of a sun, planet and internal gearing. The planetary gearboxes are available in different versions and with a wide range of accessories to meet the requirements in different working areas. As the planetary gearboxes operate in small spaces with high torques, their high power density results in a correspondingly high thermal load in the gearboxes. For this reason, the thermal performance must be checked when selecting a gearbox. Planetary gearboxes are primarily used in mobile machines and have become established in cranes, metal processing machines, construction machinery and wind turbines.
Planetary geared motors up to 50,000 Nm
- Ten sizes
- Nominal torques from 1000 Nm to 50,000 Nm
- Reduction ratios from 3.5 to 3000
- Standard IEC B5 connection to electric motor possible
- Various cooling options
- Drive stage optionally with bevel or worm gear
- Connection to hydraulic motor possible
- Special shafts, e.g. with multi-spline profile to DIN 5480 or DIN 5482 or with shrink disc
- Housing and flanges made of spheroidal graphite cast iron GGG40
- Standard sealing rings FKM and synthetic oil
- Standard protective cap for output seal
Various planetary gearbox designs
Planetary gearbox, solid shaft drive, without motor
Options and accessories
- IEC flange B5 for electric motor
- Various output flanges
- Shrink disc
- Backstop
- Air heat exchanger, water heat exchanger
- Temperature sensor, thermostat
- oil flow meter, oil filter
- Special seals
- oil sight glass
- oil expansion tank
- Torque arm
- Electromagnetic or hydraulic brakes
SEO=Planetary geared motor 0.37 - 55KW