Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 278 rpm, Ratio (i)= 5,33, Torque (M²)= 1827 Nm, Operating factor (fs)= 1.9, Type= B5, Shaft= 80 mm x 130 mm, Weight= 554 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearbox avoid an overtemperature, a clarification in advance regarding the application is necessary. Please send us this Form filled out and returned. The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1.1 kW, Speed (n²)= 0.68 rpm, Ratio (i)= 2141.02, Torque (M²)= 11781 Nm, Operating factor (fs)= 1.9, Type= B5, Shaft= 110 mm x 210 mm, Weight= 250 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1.5 kW, Speed (n²)= 1.1 rpm, Ratio (i)= 1379.15, Torque (M²)= 10637 Nm, Operating factor (fs)= 2.4, Type= B5, Shaft= 110 mm x 210 mm, Weight= 252 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2.2 kW, Speed (n²)= 1.1 rpm, Ratio (i)= 1379.15, Torque (M²)= 15600 Nm, Operating factor (fs)= 1.6, Type= B5, Shaft= 110 mm x 210 mm, Weight= 258 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2.2 kW, Speed (n²)= 1.9 rpm, Ratio (i)= 781.52, Torque (M²)= 9051 Nm, Operating factor (fs)= 2.7, Type= B5, Shaft= 110 mm x 210 mm, Weight= 258 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3.0 kW, Speed (n²)= 2.7 rpm, Ratio (i)= 535.72, Torque (M²)= 8582 Nm, Operating factor (fs)= 2.8, Type= B5, Shaft= 110 mm x 210 mm, Weight= 261 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3.0 kW, Speed (n²)= 1.9 rpm, Ratio (i)= 781.52, Torque (M²)= 12342 Nm, Operating factor (fs)= 1.9, Type= B5, Shaft= 110 mm x 210 mm, Weight= 261 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3.0 kW, Speed (n²)= 1.1 rpm, Ratio (i)= 1379.15, Torque (M²)= 21273 Nm, Operating factor (fs)= 1.2, Type= B5, Shaft= 110 mm x 210 mm, Weight= 261 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 1.2 rpm, Ratio (i)= 1385.99, Torque (M²)= 24386 Nm, Operating factor (fs)= 1.2, Type= B5, Shaft= 110 mm x 210 mm, Weight= 271 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 1.9 rpm, Ratio (i)= 781.52, Torque (M²)= 16343 Nm, Operating factor (fs)= 1.5, Type= B5, Shaft= 110 mm x 210 mm, Weight= 271 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 2.7 rpm, Ratio (i)= 535.72, Torque (M²)= 11364 Nm, Operating factor (fs)= 2.1, Type= B5, Shaft= 110 mm x 210 mm, Weight= 271 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5.5 kW, Speed (n²)= 2.7 rpm, Ratio (i)= 535.72, Torque (M²)= 15625 Nm, Operating factor (fs)= 1.5, Type= B5, Shaft= 110 mm x 210 mm, Weight= 284 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5.5 kW, Speed (n²)= 1.9 rpm, Ratio (i)= 781.52, Torque (M²)= 22472 Nm, Operating factor (fs)= 1.1, Type= B5, Shaft= 110 mm x 210 mm, Weight= 284 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 237 rpm, Ratio (i)= 6.23, Torque (M²)= 1744 Nm, Operating factor (fs)= 2,5, Type= B5, Shaft= 90 mm x 170 mm, Weight= 519 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.
Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 7.5 kW, Speed (n²)= 2.7 rpm, Ratio (i)= 535.72, Torque (M²)= 21235 Nm, Operating factor (fs)= 1.1, Type= B5, Shaft= 110 mm x 210 mm, Weight= 294 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 11 kW, Speed (n²)= 5 rpm, Ratio (i)= 295.31, Torque (M²)= 18317 Nm, Operating factor (fs)= 1.1, Type= B5, Shaft= 110 mm x 210 mm, Weight= 370 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 11 kW, Speed (n²)= 9 rpm, Ratio (i)= 163.64, Torque (M²)= 10252 Nm, Operating factor (fs)= 2.3, Type= B5, Shaft= 110 mm x 210 mm, Weight= 370 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 282 rpm, Ratio (i)= 5.25, Torque (M²)= 1797 Nm, Operating factor (fs)= 2.3, Type= B5, Shaft= 90 mm x 170 mm, Weight= 608 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 238 rpm, Ratio (i)= 6.23, Torque (M²)= 2124 Nm, Operating factor (fs)= 2.0, Type= B5, Shaft= 90 mm x 170 mm, Weight= 608 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 16 rpm, Ratio (i)= 92.73, Torque (M²)= 7991 Nm, Operating factor (fs)= 2.8, Type= B5, Shaft= 110 mm x 210 mm, Weight= 376 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 9 rpm, Ratio (i)= 163.64, Torque (M²)= 13979 Nm, Operating factor (fs)= 1.7, Type= B5, Shaft= 110 mm x 210 mm, Weight= 376 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 15 kW, Speed (n²)= 11 rpm, Ratio (i)= 130.40, Torque (M²)= 11162 Nm, Operating factor (fs)= 2.1, Type= B5, Shaft= 110 mm x 210 mm, Weight= 376 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 237 rpm, Ratio (i)= 6.23, Torque (M²)= 1744 Nm, Operating factor (fs)= 2,5, Type= B5, Shaft= 90 mm x 170 mm, Weight= 519 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.
Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 238 rpm, Ratio (i)= 6.23, Torque (M²)= 2124 Nm, Operating factor (fs)= 2.0, Type= B5, Shaft= 90 mm x 170 mm, Weight= 608 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.
Planetary geared motor in various designs
Planetary geared motors are available up to 75kW and are used today in various areas with high torque requirements and compact designs. The modular planetary gearboxes consist of a sun, planet and internal gearing. The planetary gearboxes are available in different versions and with a wide range of accessories to meet the requirements in different working areas. As the planetary gearboxes operate in small spaces with high torques, their high power density results in a correspondingly high thermal load in the gearboxes. For this reason, the thermal performance must be checked when selecting a gearbox. Planetary gearboxes are primarily used in mobile machines and have become established in cranes, metal processing machines, construction machinery and wind turbines.
Planetary geared motors up to 50,000 Nm
- Ten sizes
- Nominal torques from 1000 Nm to 50,000 Nm
- Reduction ratios from 3.5 to 3000
- Standard IEC B5 connection to electric motor possible
- Various cooling options
- Drive stage optionally with bevel or worm gear
- Connection to hydraulic motor possible
- Special shafts, e.g. with multi-spline profile to DIN 5480 or DIN 5482 or with shrink disc
- Housing and flanges made of spheroidal graphite cast iron GGG40
- Standard sealing rings FKM and synthetic oil
- Standard protective cap for output seal
Various planetary gearbox designs
Planetary gearbox, solid shaft drive, without motor
Options and accessories
- IEC flange B5 for electric motor
- Various output flanges
- Shrink disc
- Backstop
- Air heat exchanger, water heat exchanger
- Temperature sensor, thermostat
- oil flow meter, oil filter
- Special seals
- oil sight glass
- oil expansion tank
- Torque arm
- Electromagnetic or hydraulic brakes
SEO=Planetary geared motor 0.37 - 55KW