Helical gearmotor with integrated frequency inverter EASYdrive ED400 and accessories Power= 1,1 kW, Speed= 26 to 307 rpm, Ratio (i)= 5,47, Torque (M²)= 39 Nm, Service factor (fs)= 2,0.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 28,7 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency inverterPower= 1.1 kW, Size= A, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 2.6 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,1 kW, Speed= 8 to 97 rpm, Ratio (i)= 17,33, Torque (M²)= 123 Nm, Service factor (fs)= 0,9.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,Weight= 25,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED400 and accessories Power= 1,1 kW, Speed= 8 to 97 rpm, Ratio (i)= 17,33, Torque (M²)= 123 Nm, Service factor (fs)= 0,9.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 29,7 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency inverterPower= 1.1 kW, Size= A, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 2.6 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 16 to 193 rpm, Ratio (i)= 8,70, Torque (M²)= 85 Nm, Service factor (fs)= 0,9.Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,Weight= 25,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 40 to 464 rpm, Ratio (i)= 3,62, Torque (M²)= 36 Nm, Service factor (fs)= 1,5.Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,Weight= 25,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 24 to 279 rpm, Ratio (i)= 6,00, Torque (M²)= 59 Nm, Service factor (fs)= 1,1.Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,Weight= 25,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 30 to 368 rpm, Ratio (i)= 4,56, Torque (M²)= 45 Nm, Service factor (fs)= 1,3.Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,Weight= 25,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,1 kW, Speed= 6 to 64 rpm, Ratio (i)= 26,10, Torque (M²)= 185 Nm, Service factor (fs)= 1,1.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,Weight= 27,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED400 and accessories Power= 1,1 kW, Speed= 6 to 64 rpm, Ratio (i)= 26,10, Torque (M²)= 185 Nm, Service factor (fs)= 1,1.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 31,7 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency inverterPower= 1.1 kW, Size= A, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 2.6 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED400 and accessories Power= 1,5 kW, Speed= 18 to 210 rpm, Ratio (i)= 8,01, Torque (M²)= 79 Nm, Service factor (fs)= 1,1.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 31,5 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency inverterPower= 1.5 kW, Size= A, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 3.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED400 and accessories Power= 1,5 kW, Speed= 13 to 150 rpm, Ratio (i)= 11,12, Torque (M²)= 109 Nm, Service factor (fs)= 0,9.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 31,5 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency inverterPower= 1.5 kW, Size= A, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 3.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED400 and accessories Power= 1,5 kW, Speed= 31 to 367 rpm, Ratio (i)= 4,57, Torque (M²)= 45 Nm, Service factor (fs)= 1,7.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm, Weight= 31,5 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency inverterPower= 1.5 kW, Size= A, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 3.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 18 to 210 rpm, Ratio (i)= 8,01, Torque (M²)= 79 Nm, Service factor (fs)= 1,1.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,Weight= 27,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 13 to 150 rpm, Ratio (i)= 11,12, Torque (M²)= 109 Nm, Service factor (fs)= 0,9.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,Weight= 27,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 31 to 367 rpm, Ratio (i)= 4,57, Torque (M²)= 45 Nm, Service factor (fs)= 1,7.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,Weight= 27,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED400 and accessories Power= 1,5 kW, Speed= 7 to 80 rpm, Ratio (i)= 20,92, Torque (M²)= 205 Nm, Service factor (fs)= 1,0.Type = B3 (B35 for an extra charge), Shaft= 25 x 50 mm, Weight= 33,4 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency inverterPower= 1.5 kW, Size= A, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 3.3 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Spur gear motor with integrated frequency converter EASYdrive ED400 Power= 1.5 kW, speed= 8 to 98 rpm, gear ratio (i)= 17.14, torque (M²)= 168 Nm, operating factor (fs)= 1.2.Design= B3 (B35 for an additional charge), shaft= 25x50 mm, weight= 33.4 kg, color= RAL5010,Temperature sensor= 3 x PTC thermistors. Please select the desired installation position when ordering! Frequency converterPower= 1.5 kW, size= A, input voltage= 3 x 400V +10% (three-phase), input frequency= 50/60 Hz,Output frequency = 0- 400 Hz, EMC filter = C2, protection class = IP65, dimensions = 233mm x 153mm x 120mm,Mains current (input) = 3.3 A. Ideal control range = 5- 60 Hz, with constant nominal torque, below 30 Hz an external fan is required for cooling. Product informationThe frequency converter optionally offers the option of becoming "bus-capable" with the help of fieldbus modules.With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos, the EASYdrive offerscompatibility with almost all common control environments. The customer can select the bus system relevant to them and thus integrate the EASYdrive ideally into the control environment of their application. The required optional control variant must be specified when ordering. The EASYdrive drive controllers are CE, UL and CSA certified. The EASYdrive complies with EMC class C2 (with 3-phase mains supply) or C1 (with 1-phase mains supply) without the need for external filtering measures. Possible variant selection! Product selectionWhen selecting the frequency converter, please note that there are 3 variants. This includes firstly the devicein standard design, secondly the device with a membrane keyboard and thirdly the device with an MMI control unit.The "frequency converter in standard design" shown is fully usable and contains a side-mounted potentiometer, but requires a corresponding control unit for control.One of the following options must be ordered for this:- External control unit (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The "frequency converter with membrane keyboard" variant contains a built-in potentiometer and offers the option of controlling theFU directly, e.g. start-stop, left-right run, etc. One of the following options must also be ordered for parameterization:- External Control unit (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The "Frequency converter with MMI control unit" variant does not require an optional control unit,and a display is also included in the device cover. The options mentioned can be used if required. Important informationThis drive is a custom-made product. Withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples! Technical changes reserved.
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 7 to 80 rpm, Ratio (i)= 20,92, Torque (M²)= 205 Nm, Service factor (fs)= 1,0.Type = B3 (B35 for an extra charge), Shaft= 25 x 50 mm,Weight= 29,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 1,5 kW, Speed= 8 to 98 rpm, Ratio (i)= 17,14, Torque (M²)= 168 Nm, Service factor (fs)= 1,2.Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,Weight= 29,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 0,37 kW, Speed= 1 to 12 rpm, Ratio (i)= 138,55, Torque (M²)= 327 Nm, Service factor (fs)= 1,4.Type = B3 (B35 for an extra charge), Shaft= 35x70 mm,Weight= 35,8 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 0.37 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 0,75 kW, Speed= 2 to 25 rpm, Ratio (i)= 68,03, Torque (M²)= 327 Nm, Service factor (fs)= 0,9,Weight= 30,1 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 0.75 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 6.9 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 0,75 kW, Speed= 25 rpm, Ratio (i)= 55,74, Torque (M²)= 268 Nm, Service factor (fs)= 1,0.Type = B3 (B35 for an extra charge), Shaft= 30x60 mm,Weight= 30,1 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 0.75 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 6.9 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED400 and accessories Power= 0,75 kW, Speed= 3 to 30 rpm, Ratio (i)= 55,74, Torque (M²)= 268 Nm, Service factor (fs)= 1,0.Type = B3 (B35 for an extra charge), Shaft= 30x60 mm, Weight= 34,1 kg, Paint= RAL5010,Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency inverterPower= 0.75 kW, Size= A, Input Voltage= 3 x 400V + 10% (three-phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C2, Degree of protection= IP65, 233mm x 153mm x 120mm,Mains current (input)= 1.9 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Information The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical gearmotor with integrated frequency inverter EASYdrive ED230 and accessories Power= 0,75 kW, Speed= 3 to 36 rpm, Ratio (i)= 47,39, Torque (M²)= 228 Nm, Service factor (fs)= 1,2.Type = B3 (B35 for an extra charge), Shaft= 30x60 mm,Weight= 30,1 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 0.75 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 6.9 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Product Informatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply). ! Possible variant selection! Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. Important notesThis drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!All product photos are non-binding examples!
Helical geared motors with frequency inverter
Thanks to our many years of experience in the field of drive technology, we are the ideal partner when it comes to the use of helical geared motors with integrated frequency inverters. Top quality, a competent team and a competitive price are our top priorities. If you cannot find the right drive for your application, please send us an enquiry by e-mail or simply contact us directly by telephone.
Size and performance
The electrically variable helical geared motors are made from an aluminium or grey cast iron housing and are available in several sizes. The combination of helical gearbox, frequency inverter and three-phase motor is available with an output of 0.18kW, 0.25kW, 0.37kW, 0.55kW, 0.75kW, 1.1kW, 1.5kW, 2.2kW, 3.0kW, 4.0kW, 5.5kW, 7.5kW to 22kW.
Frequency inverter - Installation
The EASYdrive frequency inverter is mounted on the motor terminal box using an adapter plate and can be mounted in 90° steps by rotating the motor. The JS-Technik geared motor can be installed in almost any required position. The installation positions are labelled M1, M2, M3, M4, M5, M6.
Frequently required accessories
As the adjustable drive unit is often operated below 35 Hertz, the motor should be protected from overheating with an external forced cooling fan in such cases.
Furthermore, a high level of self-locking of the gear unit is often necessary. As this is often too low for gearboxes, a three-phase motor with brake is required. Naturally, we supply and install the forced cooling fan and the motor brake for the required helical geared motor.
The special frequency inverter
The frequency inverter offers the option of becoming "bus-capable" with the help of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos, the EASYdrive offers compatibility with almost all common control environments. Customers can select the bus system that is relevant to them and thus integrate the EASYdrive perfectly into the control environment of their application. The required optional control variant must be specified when ordering. The EASYdrive drive controllers are CE, UL and CSA certified. The EASYdrive complies with EMC class C2 (for 3-phase mains supply) or C1 (for 1-phase mains supply) without external filter measures.
SEO: Helical gearbox with frequency inverter motor