Single phase motor -ML2 112M-6, 2.2 kW, 6pol, B3
Product information "Single phase motor -ML2 112M-6, 2.2 kW, 6pol, B3"
Single-phase motor with Operating and starting capacitor
Power= 2.2 kW, Speed= 6 pole, Voltage= 1 x 230 V (± 5% according to VDE 0530), Design= B3,
Weight approx. 31.8 kg, Shaft = 28 x 60 mm, Frequency= 50 Hertz, Protection class= IP55, Operating mode= S1- 100% ED,
Temperature sensor= 1 x PTO thermal sensor, Cooling= axial fan (plastic). Insulation class= F (155°C),
Efficiency class= IE2, Efficiency= 81.8%, Terminal box= aluminum, Terminal box position= top,
Housing= die-cast aluminum, Ball bearings= SKF, C&U, or equivalent.
AC motors are suitable for both directions of rotation.
Optional:
On/off switch with reversing switch for left/right rotation, underVoltage release,
Collar plug= 1 x 230 V, Switching capacity= 16 A, Ambient temperature= -5°C to +40°C,
Cable between motor and switch housing= approx. 90 cm.
General:
Due to the start-up and Operating capacitor gives the 230V motor a stronger starting torque.
The starting capacitor is switched off by a starting relay when the Speed is reached.
Speed control via Frequency converters or similar therefore leads to faults and is not permitted.
All product photos are non-binding examples! Technical changes reserved.
| Ambient temperature: | 40 °C |
|---|---|
| Engine protection: | Thermocouple PTO- single |
| Flange dimensions: | 160 x 110 x 130 mm |
| Frequency: | 50 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 2,2 kW |
| Shaft dimensions: | 28 x 60 mm |
| Rotation speed: | 1000 rpm / 6 polig |
| Shaft diameter: | 28 mm |
| Type of construction: | B14 |
| Tension: | 1 x 230 V |
| Protection class: | IP55 |
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 2 |
Accesories
Motor switch (on-off) with selector switch right / left for 0.12 - 2.2kW at 1x 230V, for external installation, cable length approx. 90cm, Description:- Undervoltage release,- Switching capacity 16 A - 1x230V,- Ambient temperature -5°C to +40°C- Collar plug 1x230 V. Switching the direction of rotation only when the motor is at a standstill!
Heating tape for a space heater for Electric motors size 100-112-132 The anti-condensation heater is used to prevent the formation of condensation to prevent during operational breaks.
Protective roof (without hood) for electric motors in size 112 Diameter: Ø200 mm If ordered with a motor, the protective roof can also be delivered assembled. Please select. All product photos are non-binding examples! Technical changes reserved.
Motor mounting rails for size 100- 112 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 395 mmSlide length: 302 mmWeight: approx. 3.5 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!
Motor mounting rails for size 100- 112- 132 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 495 mmSlide length: 405 mmWeight: approx. 4,2 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!