Three-phase motor IE5 160L-4, 15 kW, 4 pole, B3

£1,415.75*

Delivery time on demand

Product number: 5F20161217A000

Downloads

Product information "Three-phase motor IE5 160L-4, 15 kW, 4 pole, B3"

Electric motor, power=15 kW, speed=1500 rpm, design=B3

Shaft=42 x 110 mm, voltage=3 x 400/690 V-50 Hz, 3 x 480/830 V-60 Hz (± 5% according to VDE 0530), frequency=50/60 Hertz.

Efficiency class=IE5, efficiency=95.1%, paint finish=RAL 5010 (gentian blue), protection class=IP55, temperature sensor=3 x PTC thermistors,

Operating mode=S1- 100% ED, terminal box position=top, housing=grey cast iron, insulation class=F (155°C),

Ball bearing=SKF or equivalent, cooling=axial fan (plastic), motor feet=screwable (if available).

The motor bearings are designed for clutch operation. For belt drive, we recommend reinforced cylindrical roller bearings

The electric motor is suitable for use with frequency inverters and for both directions of rotation.

In accordance with VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified personnel

Qualified personnel. For modifications or special designs, please send us an enquiry.

All product photos are non-binding examples! Subject to technical changes.

Ambient temperature:	40 °C
Engine protection:	PTC thermistor 3-fold
Frequency:	50 Hz, 60 Hz
Installation altitude:	1000 m
Kühlungsart:	IC 411
Operating mode:	S1
Performance:	15 kW
Shaft dimensions:	42 x 110 mm
Rotation speed:	1500 rpm / 4 polig
Shaft diameter:	42 mm
Type of construction:	B3
Tension:	3 x 400/690 V
Protection class:	IP55
Direction of rotation:	Left, Right
Efficiency Class:	IE 5

Properties "Three-phase motor IE5 160L-4, 15 kW, 4 pole, B3"

Ambient temperature:	40 °C
Engine protection:	PTC thermistor 3-fold
Frequency:	50 Hz, 60 Hz
Installation altitude:	1000 m
Kühlungsart:	IC 411
Operating mode:	S1
Performance:	15 kW
Shaft dimensions:	42 x 110 mm
Rotation speed:	1500 rpm / 4 polig
Shaft diameter:	42 mm
Type of construction:	B3
Tension:	3 x 400/690 V
Protection class:	IP55
Direction of rotation:	Left, Right
Efficiency Class:	IE 5

Zubehör

Rain cover BG160

Fan cover with rain protection roof for Electric motors in size 160. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.

£104.99*

Details

Motor-slide-plate IEC160

Electric motor slide plate in size IEC 160 Dimensions: 450 x 350 x 40mm (LxWxH)Weight capacity: 160kgWeight: approx. 9.7kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

£169.73*

Details

Slide rails sice 160

Motor mounting rails for size 160 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 530 mmSlide length: 413 mmWeight: approx. 7.2 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

£98.62*

Details

Slide rails sice 160/180

Motor mounting rails for size 160-180 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 686 mmSlide length: 538 mmWeight: approx. 12.8 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

£173.80*

Details

Thermal sensor opener NAT 130 ° C triple up to BG315

PTO temperature monitoring of the motor winding

£88.52*

Details

Cylindrical roller bearing BG160

Cylindrical roller bearing, A-side Reinforced bearing for electric motors of size 160. To accommodate increased radial loads. Minimum load of 20% required!

£90.01*

Details

CSA/UL certificate for cast iron motors

Certified and documented CSA/UL certificate 70197087 For gray cast iron motors up to IE3.

£109.70*

Details

1-JS-IP66-11KW-15KW-18,5KW-22KW-Frequency-Inverter

Frequency Inverter LS 0150S100-4EXFNS

Frequency inverter, 15.0 kW, 380V- 400V- 420V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

£1,389.22*

Details

Frequency Inverter LS 0150S100-4EOFNS

Frequency inverter, VFD, 15.0 kW, 380V-400V-420V-480V, IP20, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

£823.09*

Details