CMRV040 712-4 - 0.37 kW - 28 to 336 rpm worm gear + frequency inverter motor ED230
Product information "CMRV040 712-4 - 0.37 kW - 28 to 336 rpm worm gear + frequency inverter motor ED230"
Worm gear motor, power = 0.37 KW, speed = 28 to 336 rpm
Protection class = IP55, insulation class = F (155°C), operating mode = S1, duty cycle = S1- 100%,
Hollow shaft = 18mm, motor speed = 4 pole, gear ratio (i) = 5, torque = 11 Nm,
Service factor (f.s.) = 3 . Terminal box= top (rotatable), weight= 8.3 kg, color= RAL 5010 (gentian blue),
Temperature sensor= 3 x PTC thermistors, housing= die-cast aluminum, ball bearings= SKF, C&U or equivalent,
Frequency converter
Power= 0.37 KW, size= A, input voltage= 1 x 230V +10% (single-phase), input frequency= 50/60 Hz,
Output frequency= 0- 400 Hz, EMC filter= C1, protection class= IP65, dimensions= 233mm x 153mm x 120mm,
Mains current (input)= 4.5 A. Ideal control range= 5- 60 Hz, with constant nominal torque, below 30 Hz an external fan is required for cooling.
Product information
The frequency converter optionally offers the possibility of becoming "bus-capable" with the help of fieldbus modules.
With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos, the EASYdrive offers
compatibility with almost all common control environments. The customer can select the bus system relevant to them and thus ideally integrate the EASYdrive into the control environment of their application.
The required optional control variant must be specified when ordering.
The EASYdrive drive controllers are CE, UL and CSA certified. The EASYdrive complies with EMC class C2 (with 3-phase mains supply) or C1 (with 1-phase mains supply) without external filter measures.
! Possible variant selection!
Product selection
When selecting the frequency converter, please note that there are 3 variants. This includes firstly the device
in standard design, secondly the device with a membrane keyboard and thirdly the device with an MMI control unit.
The "frequency converter in standard design" shown is fully usable and contains a side-mounted potentiometer, but requires a corresponding control unit for control.
One of the following options must be ordered for this:
- External operating / programming device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter
The "frequency converter with membrane keyboard" variant contains a built-in potentiometer and offers the option of controlling the
FU directly, e.g. start-stop, left-right run, etc.
One of the following options must also be ordered for parameterization:
- External operating / programming device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter
The "frequency converter with MMI operating unit" variant does not require an optional control panel,
and there is also a display in the device cover. The options mentioned can be used if required.
Important information
This drive is a custom-made product. Withdrawal or cancellation of the purchase is excluded!
All product photos are non-binding examples! Technical changes reserved.
| Control range: | here. 28 bis 336 rpm |
|---|---|
| Performance: | 0,37 kW |
| Torque: | 11 to 25 Nm |
| Shaft diameter: | 18 mm |
| Tension: | 1 x 230 V |
| Series: | EASYdrive ED230 0,37kW - 1,5kW |
Downloads
- JS- CMRV040- Maßzeichnung / Data sheet
- JS- Elektromotor- MS2 712- Datenblatt / Data sheet
- JS- EASYdrive- Frequenzumrichter- Datenblatt
- JS- CMRV-Serie- Betriebsanleitung
- JS- Elektromotoren- Betriebsanleitung
- JS- Electric motors- Operation instructions
- JS- MMI- Externes Bedien- / Programmiergerät
- JS- EASYdrive- Frequenzumrichter- Bedienungsanleitung
- JS- MMI- External Operating- / Programming Device
- JS- EASYdrive- Frequency Inverter- Operation Manual
- JS- PC-Software (nur mit Parametrierkabel möglich)
Accesories
Hollow shaft cover cap for CMRV 040, plastic, black, All product photos are non-binding examples! Technical changes reserved.
Double output shaft with feather key for worm gear CMRV 040, 18 x 40mm, both sides All product photos are non-binding examples! Technical changes reserved.
MMI handheld control unit, including 0.5m spiral cable with M12 screw coupling The following functions are possible with the EASYdrive MMI: • Parameterization of the device settings • Control (e.g., locking and unlocking) • Display of various process variables • Saving parameter sets (max. 8) • Transferring parameter sets to other INVEORs (Image shows product example only)
External fan, External fan unit, Motor size 71 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 35 watts, 0.19 A, 2950 rpm, 52 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.21 A, 3500 rpm, 52 m3/h, capacitor 3µF3x230/400 V-50 Hz, 30 watts, 0.19 A/0.12 A, 2900 rpm, 52 m3/h3x 254/460 V-60 Hz, 40 watts, 0.19/0.11, 3500 rpm, 52 m3/hPainted RAL5010, total length 185 mm, inner diameter 136 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.
Right-left rotation switch with potentiometer and emergency stop in a plastic housing. Switch not latching. External frequency converter control. Potentiometer connection solder contacts 1 NO contact each for left and right rotation Housing dimensions in mm (WxHxD): 160x80x55 Color: similar to RAL7035 Potentiometer: 2.2k / 2W, rotation angle 270 °, rotary knob : 32mm cable gland: M16, clamping range 5-10mm degree of protection: IP65, for connection in the control circuit Optionally without or with 1m, 3m or 5m cable (wired). Please choose version. All product photos are non-binding examples!
Touch operator terminal for EASYdrive frequency converter The 7" touch operator terminal in dark gray is specially designed foroperating and monitoring tasks in all areasof industrial automation. The fanlesssystem with 32-bit Cortex A8 processor and 600 MHzclock has plenty of computing power and impresses withpleasantly fast page switching. The "EasyBuilder Pro" configuration software does not place any specialrequirements on your PC, is easy to use andis available free of charge. Écran graphique LCD TFT 7" 800 x 480 pixels Rétroéclairage LED Boîtier en plastique robuste Système de refroidissement sans ventilateur Horloge en temps réel RTC IP65 à l'avant, conforme NEMA4 Ethernet 10/100 BaseTX RS485 Hôte USB
CANopen interface card for EASYdrive. The CANopen bus system belongs to the fieldbus family and is based on the CAN bus (Controller Area Network). As a rule, the network is built up in a linear structure. The maximum data transfer rate on a CANopen bus can be up to 1 Mbit / s and depends on the cable length. A maximum of 127 participants may exist in the bus association. Including M12 connection cable open 2 m, M12 connector / open / CANopen / 5-pin / 2 m / A-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.
Rated operational Voltage Ue 12-26 V DC Utilization category DC-13 Ue / Ie 12-26 DC / 0.2 A according to IEC / EN 60947-5-2 Voltage output (control range) 0- 10 V DC short-circuit protection device switching element permanent short-circuit u. overload-proof, clocking Protection class IIIM UB GND RL U-OUT U-OUT housing AL die-cast; Lid die-cast aluminum actuating elements foot pedal (PA) ambient temperature -30 ° C to +80 ° C contact type PNP closer, teachbar from 0.1 - 5.9 mm switching force pedal approx. 10 N (center of pedal) Mechanical life 10 x 106 switching cycles and switching frequency max. 50 / min; Fastening 2 M8 screws connection type screw connections (M3.5) number of connections 4, conductor cross sections solid 0.5 - 1.5 mm2 stranded wire with ferrule 0.5 - 1.5 mm2, cable entry 1 x M20 x 1.5 weight 1.5 kg, Protection class IP65 according to IEC / EN 60529 drawing ID: Z030
Bluetooth adapter for EASYdrive The EASYdrive offers a Bluetooth interface that integrates as a plug-in variant via the M12 can be. -only additional price, cannot be ordered individually- (image only product example) All product photos are non-binding examples! Technical changes reserved.
Output flange for CMRV 040 Ø 110 x 60 x 75 mm. B5 All product photos are non-binding examples! Technical changes reserved.
Output shaft with feather key for worm gear CMRV 040, 18 x 40mm All product photos are non-binding examples! Technical changes reserved.
Torque arm for CMRV 040 All product photos are non-binding examples! Technical changes reserved.
Parameterization cable USB PC USB cable with interface converter PC software available for free download All product photos are non-binding examples! Technical changes reserved.
The potentiometer integrated on the side enables a comfortable setpoint specification. The interface for the connection is available as standard. The potentiometer is available as an accessory. -The potentiometer is part of the converter and cannot be retrofitted.- All product photos are non-binding examples!
Brake chopper with braking resistor size A for EASYdrive. 100 W, 100 ohms; IP65, connecting cable 510mm, L = 110mm W = 80mm H = 15mm. -only additional price, cannot be ordered individually- All product photos are non-binding examples!
Right-left rotation switch with emergency stop in a plastic housing Switch does not latch. External frequency converter control. Optionally with 1m, 3m or 5m cable (wired). Please select the version. All product photos are non-binding examples! Technical changes reserved.
EtherCAT interface card for EASYdrive. The EtherCAT bus system belongs to the fieldbus family. Usually the network is in linear structure. The maximum data transfer rate on an EtherCAT bus can up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.
Profibus interface card for EASYdrive. Communication interface. With the help of PROFIBUS, devices from different providers can be customized communicate. PROFIBUS independently distinguishes between master and slave devices, so that multi-master operation is also possible. Including M12 connection cable open 2 m, M12 connector / open / Profibus / 5-pin / 2 m / B-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.