Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3 kW, Speed (n²)= 51 rpm, Ratio (i)= 27,53, Torque (M²)= 535 Nm, Operating factor (fs)= 1,3, Type= B3, Hollow shaft= 40 mm, Weight= 83 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3,0 kW, Speed (n²)= 39 rpm, Ratio (i)= 35,49, Torque (M²)= 690 Nm, Operating factor (fs)= 1,1, Type= B3, Hollow shaft= 40 mm, Weight= 83 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 242 rpm, Ratio (i)= 5,79, Torque (M²)= 153 Nm, Operating factor (fs)= 3,2, Type= B3, Hollow shaft= 40 mm, Weight= 81 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 137 rpm, Ratio (i)= 10,25, Torque (M²)= 271 Nm, Operating factor (fs)= 2,8, Type= B3, Hollow shaft= 40 mm, Weight= 81 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 103 rpm, Ratio (i)= 13,60, Torque (M²)= 358 Nm, Operating factor (fs)= 2,3, Type= B3, Hollow shaft= 40 mm, Weight= 81 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 316 rpm, Ratio (i)= 4,42, Torque (M²)= 117 Nm, Operating factor (fs)= 3,7, Type= B3, Hollow shaft= 40 mm, Weight= 81 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 79 rpm, Ratio (i)= 17,65, Torque (M²)= 464 Nm, Operating factor (fs)= 1,8, Type= B3, Hollow shaft= 40 mm, Weight= 81 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 189 rpm, Ratio (i)= 7,42, Torque (M²)= 196 Nm, Operating factor (fs)= 3,3, Type= B3, Hollow shaft= 40 mm, Weight= 81 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 62 rpm, Ratio (i)= 22,46, Torque (M²)= 590 Nm, Operating factor (fs)= 1,4, Type= B3, Hollow shaft= 40 mm, Weight= 81 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 51 rpm, Ratio (i)= 27,53, Torque (M²)= 714 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 40 mm, Weight= 87 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4 kW, Speed (n²)= 44 rpm, Ratio (i)= 32,11, Torque (M²)= 833 Nm, Operating factor (fs)= 0,9, Type= B3, Hollow shaft= 40 mm, Weight= 87 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 0,55 kW, Speed (n²)= 10 rpm, Ratio (i)= 138,35, Torque (M²)= 486 Nm, Operating factor (fs)= 3,2, Type= B3, Hollow shaft= 50 mm, Weight= 109 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 0,55 kW, Speed (n²)= 5,8 rpm, Ratio (i)= 242,68, Torque (M²)= 851 Nm, Operating factor (fs)= 1,8, Type= B3, Hollow shaft= 50 mm, Weight= 109 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 0,75 kW, Speed (n²)= 14 rpm, Ratio (i)= 101,48, Torque (M²)= 489 Nm, Operating factor (fs)= 3,2, Type= B3, Hollow shaft= 50 mm, Weight= 111 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 0,75 kW, Speed (n²)= 8 rpm, Ratio (i)= 174,97, Torque (M²)= 841 Nm, Operating factor (fs)= 1,8, Type= B3, Hollow shaft= 50 mm, Weight= 111 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 0,75 kW, Speed (n²)= 10 rpm, Ratio (i)= 138,35, Torque (M²)= 666 Nm, Operating factor (fs)= 2,3, Type= B3, Hollow shaft= 50 mm, Weight= 111 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1,1 kW, Speed (n²)= 6,5 rpm, Ratio (i)= 215,03, Torque (M²)= 1513 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 50 mm, Weight= 114 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1,1 kW, Speed (n²)= 14 rpm, Ratio (i)= 101,48, Torque (M²)= 718 Nm, Operating factor (fs)= 2,2, Type= B3, Hollow shaft= 50 mm, Weight= 114 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1,1 kW, Speed (n²)= 10 rpm, Ratio (i)= 138,35, Torque (M²)= 977 Nm, Operating factor (fs)= 1,6, Type= B3, Hollow shaft= 50 mm, Weight= 114 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1,5 kW, Speed (n²)= 15 rpm, Ratio (i)= 95,87, Torque (M²)= 927 Nm, Operating factor (fs)= 1,7, Type= B3, Hollow shaft= 50 mm, Weight= 104 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1,5 kW, Speed (n²)= 12 rpm, Ratio (i)= 121,49, Torque (M²)= 1172 Nm, Operating factor (fs)= 1,3, Type= B3, Hollow shaft= 50 mm, Weight= 104 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1,5 kW, Speed (n²)= 9,1 rpm, Ratio (i)= 154,63, Torque (M²)= 1490 Nm, Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 50 mm, Weight= 104 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2,2 kW, Speed (n²)= 41 rpm, Ratio (i)= 34,28, Torque (M²)= 490 Nm, Operating factor (fs)= 2,5, Type= B3, Hollow shaft= 50 mm, Weight= 116 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2,2 kW, Speed (n²)= 20 rpm, Ratio (i)= 70,59, Torque (M²)= 1003 Nm, Operating factor (fs)= 1,5, Type= B3, Hollow shaft= 50 mm, Weight= 116 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The bevel gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
Parallel shaft geared motor / shaft mounted geared motor
Electric motors with parallel shaft gearboxes from JS-Technik work extremely efficiently. They are characterised by a flat design and can therefore be integrated perfectly into applications where space is at a premium. Available in 10 sizes, the JS-Technik parallel shaft geared motors cover a torque range from 130 Nm to 180,000 Nm with an output of 0.12 kW to 160 kW. The speed range is 0.1 rpm - 350 rpm (revolutions per minute). In combination with JS frequency inverters, parallel shaft geared motors enable a wide range of system solutions with maximum efficiency and economy.
Parallel shaft gearbox with directly mounted 75KW electric motor
Shaft-mounted geared motors
Shaft-mounted gearboxes can be worm gearboxes, helical bevel gearboxes and parallel shaft gearboxes, which can be mounted on a shaft to be driven and secured with a torque arm, among other things.
Shrink discs
The hollow shaft is often designed with a shrink disc without a feather key instead of a feather key. The power range of these gearboxes starts at a few Nm and extends up to 180,000 Nm. The ratio range lies between single-stage gearboxes with a very low reduction ratio up to multi-stage high reduction ratios.
Geared motor installation positions
The JS-Technik offset geared motors / shaft-mounted geared motors can be installed in any required position, such as horizontally or vertically. To take the desired application into account here, please select between M1 - M6 using the diagram enclosed in the online shop.
Certificates and versions
Geared motor certification in accordance with international standards such as NEMA, IEC, CSA, UL, CE, GOST-R and Atex ensures worldwide acceptance.
Flat geared motor quality
The generously dimensioned working shaft and bearings, gear wheels made of high-quality case-hardened steel and the enclosed housing design ensure an exceptionally long service life.
SEO: Parallel shaft geared motors / slip-on motors