Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 18.5 kW, Speed (n²)= 20 rpm, Ratio (i)= 73.89, Torque (M²)= 7851 Nm, Operating factor (fs)= 2.6, Type= B5, Shaft= 110 mm x 210 mm, Weight= 422 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 9 rpm, Ratio (i)= 163.64, Torque (M²)= 20434 Nm, Operating factor (fs)= 1.1, Type= B5, Shaft= 110 mm x 210 mm, Weight= 440 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 14 rpm, Ratio (i)= 107.80, Torque (M²)= 13537 Nm, Operating factor (fs)= 1.4, Type= B5, Shaft= 110 mm x 210 mm, Weight= 440 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 22 kW, Speed (n²)= 20 rpm, Ratio (i)= 73.89, Torque (M²)= 9336 Nm, Operating factor (fs)= 2.2, Type= B5, Shaft= 110 mm x 210 mm, Weight= 440 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 37 rpm, Ratio (i)= 39.38, Torque (M²)= 7056 Nm, Operating factor (fs)= 2.6, Type= B5, Shaft= 110 mm x 210 mm, Weight= 499 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 48 rpm, Ratio (i)= 30.68, Torque (M²)= 5535 Nm, Operating factor (fs)= 2.6, Type= B5, Shaft= 110 mm x 210 mm, Weight= 499 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 58 rpm, Ratio (i)= 25.36, Torque (M²)= 4584 Nm, Operating factor (fs)= 3.1, Type= B5, Shaft= 110 mm x 210 mm, Weight= 499 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 11 rpm, Ratio (i)= 130.40, Torque (M²)= 22249 Nm, Operating factor (fs)= 1.0, Type= B5, Shaft= 110 mm x 210 mm, Weight= 501 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 16 rpm, Ratio (i)= 92.73, Torque (M²)= 15928 Nm, Operating factor (fs)= 1.4, Type= B5, Shaft= 110 mm x 210 mm, Weight= 501 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 20 rpm, Ratio (i)= 73.89, Torque (M²)= 12731 Nm, Operating factor (fs)= 1.6, Type= B5, Shaft= 110 mm x 210 mm, Weight= 501 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 32 rpm, Ratio (i)= 46.73, Torque (M²)= 10307 Nm, Operating factor (fs)= 1.2, Type= B5, Shaft= 110 mm x 210 mm, Weight= 573 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 48 rpm, Ratio (i)= 30.68, Torque (M²)= 6826 Nm, Operating factor (fs)= 2.1, Type= B5, Shaft= 110 mm x 210 mm, Weight= 573 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 58 rpm, Ratio (i)= 25.36, Torque (M²)= 5654 Nm, Operating factor (fs)= 2.5, Type= B5, Shaft= 110 mm x 210 mm, Weight= 573 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 68 rpm, Ratio (i)= 21.82, Torque (M²)= 4870 Nm, Operating factor (fs)= 2.9, Type= B5, Shaft= 110 mm x 210 mm, Weight= 573 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 1.1 kW, Speed (n²)= 0.69 rpm, Ratio (i)= 2110.97, Torque (M²)= 11579 Nm, Operating factor (fs)= 2.5, Type= B5, Shaft= 120 mm x 210 mm, Weight= 323 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 5.5 kW, Speed (n²)= 5.0 rpm, Ratio (i)= 291.17, Torque (M²)= 9082 Nm, Operating factor (fs)= 2.4, Type= B5, Shaft= 120 mm x 210 mm, Weight= 349 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2.2 kW, Speed (n²)= 1.0 rpm, Ratio (i)= 1385.99, Torque (M²)= 15667 Nm, Operating factor (fs)= 2.2, Type= B5, Shaft= 120 mm x 210 mm, Weight= 334 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 2.2 kW, Speed (n²)= 1.9 rpm, Ratio (i)= 752.26, Torque (M²)= 8685 Nm, Operating factor (fs)= 4.0, Type= B5, Shaft= 120 mm x 210 mm, Weight= 334 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3.0 kW, Speed (n²)= 1.0 rpm, Ratio (i)= 1385.99, Torque (M²)= 21364 Nm, Operating factor (fs)= 1.6, Type= B5, Shaft= 120 mm x 210 mm, Weight= 355 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3.0 kW, Speed (n²)= 1.6 rpm, Ratio (i)= 909.99, Torque (M²)= 14181 Nm, Operating factor (fs)= 2.5, Type= B5, Shaft= 120 mm x 210 mm, Weight= 355 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 3.0 kW, Speed (n²)= 2.2 rpm, Ratio (i)= 647.11, Torque (M²)= 10252 Nm, Operating factor (fs)= 3.4, Type= B5, Shaft= 120 mm x 210 mm, Weight= 355 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 1.1 rpm, Ratio (i)= 1385.99, Torque (M²)= 28291 Nm, Operating factor (fs)= 1.2, Type= B5, Shaft= 120 mm x 210 mm, Weight= 456 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 1.6 rpm, Ratio (i)= 909.99, Torque (M²)= 18779 Nm, Operating factor (fs)= 1.9, Type= B5, Shaft= 120 mm x 210 mm, Weight= 456 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Planetary gearmotor with IEC flange between gearbox and Three-phase motor Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 4.0 kW, Speed (n²)= 2.3 rpm, Ratio (i)= 647.11, Torque (M²)= 13575 Nm, Operating factor (fs)= 2.6, Type= B5, Shaft= 120 mm x 210 mm, Weight= 456 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!