Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 38 rpm, Ratio (i)= 38.82, Torque (M²)= 6970 Nm, Operating factor (fs)= 2.8, Type= B5, Shaft= 120 mm x 210 mm, Weight= 525 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 7.7 rpm, Ratio (i)= 191.17, Torque (M²)= 32471 Nm, Operating factor (fs)= 0.9, Type= B5, Shaft= 120 mm x 210 mm, Weight= 573 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 12 rpm, Ratio (i)= 125.52, Torque (M²)= 21431 Nm, Operating factor (fs)= 1.3, Type= B5, Shaft= 120 mm x 210 mm, Weight= 573 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 30 kW, Speed (n²)= 17 rpm, Ratio (i)= 89.26, Torque (M²)= 15352 Nm, Operating factor (fs)= 1.7, Type= B5, Shaft= 120 mm x 210 mm, Weight= 573 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 45 rpm, Ratio (i)= 32.71, Torque (M²)= 7273 Nm, Operating factor (fs)= 2.8, Type= B5, Shaft= 120 mm x 210 mm, Weight= 655 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 37 kW, Speed (n²)= 58 rpm, Ratio (i)= 25.49, Torque (M²)= 5695 Nm, Operating factor (fs)= 3.1, Type= B5, Shaft= 120 mm x 210 mm, Weight= 655 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 38 rpm, Ratio (i)= 38.82, Torque (M²)= 10455 Nm, Operating factor (fs)= 1.9, Type= B5, Shaft= 120 mm x 210 mm, Weight= 678 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 45 kW, Speed (n²)= 58 rpm, Ratio (i)= 25.49, Torque (M²)= 6927 Nm, Operating factor (fs)= 2,5, Type= B5, Shaft= 120 mm x 210 mm, Weight= 678 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 38 rpm, Ratio (i)= 38.82, Torque (M²)= 12735 Nm, Operating factor (fs)= 1.5, Type= B5, Shaft= 120 mm x 210 mm, Weight= 767 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 58 rpm, Ratio (i)= 25.49, Torque (M²)= 8437 Nm, Operating factor (fs)= 2.1, Type= B5, Shaft= 120 mm x 210 mm, Weight= 767 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.

Planetary gearmotor with IEC flange between gearbox and Three-phase motor, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz. Power= 55 kW, Speed (n²)= 88 rpm, Ratio (i)= 16.74, Torque (M²)= 5552 Nm, Operating factor (fs)= 2.9, Type= B5, Shaft= 120 mm x 210 mm, Weight= 767 kg, Paint= RAL5010. Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable). As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The Planetary gear can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel perform. For modifications or special designs please send inquiry. When ordering, please select the desired installation position. Mounting positions 2 and 4 always with oil expansion tank. All product photos are non-binding examples! Technical changes reserved.